User manual AEG-ELECTROLUX KB8100001M

[. . . ] and please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Operating Instructions 2 Safety information 2 Correct use 3 Child safety 3 Installation 3 Product Description 4 Control panel 5 Buttons and Indicator lights 5 Oven functions 6 Recommendations for Defrosting Food 7 Before using for the first time 8 Using the oven 8 Setting the electronic clock 8 Manual operation 9 Oven Lighting 9 Electronic clock functions 10 Cooking tables 12 Child lock function 16 Oven safety cut-out Water Cleaning function About this function How it works How to use Care and cleaning Cleaning the inside of the oven Cleaning the oven exterior and accessories Cleaning the large interior glass door Changing the oven bulb Environment concerns What to do if. Subject to change without notice In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. [. . . ] Condiments can be added once the surface is soft. â· Food should always be cooked after defrosting. See the following chart for defrosting times and temperature levels: FOOD Bread Cake Fish Fish Chicken Chicken Rib steak Minced meat Minced meat LO LEVEL Weight 1/2 Kg 1/2 Kg 1/2 Kg 1 Kg Time 35 min 25 min 30 min 40 min 1 Kg 1, 5 Kg 1/2 Kg 1/2 Kg 1 Kg 75 min 90 min 40 min 60 min 120 min Weight HI LEVEL Time Before using for the first time Before using for the first time Carefully read this Instruction Manual to achieve the best results from your oven. Due to the manufacturing process there may be residues of grease and other substances. To cool the oven open the door to allow ventilation and odours to escape from inside. â· After cooling, clean the oven and the accessories. During the first use, fumes and odours may occur and the kitchen should therefore be well ventilated. In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset. To operate, simply touch the glass control symbols with your fingertip. the touch control sensitivity continuously adapts to changing conditions. The two beeps you hear after that will confirm the new time has been set. This function allows you to programme the time for cooking to stop, after which the oven will turn off automatically. Programming the Cooking Stop Time: 1 Press on the clock button several times until the symbol lights up. The symbol will flash slowly to indicate that the oven will switch itself automatically. 4 Select a cooking function and temperature. 5 Once it is the set time, the oven will turn off, an alarm will sound and the symbol will flash more quickly. 6 Press on any button on the control panel to stop the alarm. You can change the programmed cooking stop time at any moment by pressing on the clock button until the symbol flashes and then by pressing on the buttons. The two beeps you hear after that will confirm the new time has been set. You can use this function even if you are already cooking with the oven. If this is the case, follow all of the above instructions except No. [. . . ] â· With the oven cold and for enamelled surfaces (e. The floor of the oven) use a nylon brush or sponge with warm soapy water. If using special oven cleaning products, use only on enamelled surfaces and follow the manufacturer's instructions. Check its assembly in accordance with the instruction manual. [. . . ]