User manual AEG-ELECTROLUX KE8404021M

[. . . ] KE8404001 KE8404021 EN User manual 2 www. aeg. com CONTENTS 1. 35 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. [. . . ] The recipes are fixed and you cannot change them. When you use the Manual function, the appliance uses the automatic settings. You can change them as with other functions. Weight Automatic dishes Roast Pork Roast Veal Braised Meat Roast Game Roast Lamb Chicken, whole Turkey, whole Duck, whole Goose, whole CT Sensor Automatic dishes Loin of Pork Roast Beef 8. 3 Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use it, it is necessary to input the food weight. Press OK to confirm. 5. Touch or to set the food weight. When the time ends, an acoustic signal sounds. ENGLISH 15 Press a sensor field to deactivate the signal. With some programmes turn over the food after 30 minutes. Refer to the Safety chapters. 4. The display shows the core temperature sensor. Press or in less than 5 seconds to set the core temperature. Set the oven function and, if necessary, the oven temperature. The appliance calculates an approximate end time. The end time is different for the different quantities of the food, the set oven temperatures (minimum 120 °C) and the operating modes. The appliance calculates the end time in approximately 30 minutes. The core temperature sensor must stay in the meat and in the socket during the cooking. When the meat is at the set core temperature, an acoustic signal sounds. The appliance deactivates automatically. Touch a sensor field to stop the signal. Remove the core temperature sensor plug from the socket and remove the meat from the oven. Be careful when you remove the tip and the plug of the core temperature sensor. 9. 1 Core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. There are two temperatures to set: • The oven temperature • The core temperature Only use the core temperature sensor supplied or the correct replacement parts. Using the core temperature sensor: Put the tip of the core temperature sensor into the centre of the meat. Put the plug of the core temperature sensor into the socket at the front of the appliance. 1. 16 www. aeg. com 9. 2 Inserting the accessories Deep pan: Push the deep pan between the guide bars of the shelf support. Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the indentions point down. Wire shelf and deep pan together: Put the wire shelf on the deep pan. [. . . ] To install the panels do the above steps in the opposite sequence. Insert the smaller panel first, and then the larger one. 2. Refer to the Safety chapters. Problem Possible cause Remedy Activate the appliance. The appliance does The appliance is deactivanot heat up. ted. ENGLISH 35 Problem Possible cause Remedy Set the clock. [. . . ]