User manual AEG-ELECTROLUX KFEA100

[. . . ] (See rating plate on underside of appliance. ) · Never allow the mains lead to come into contact with hot parts!· Never pull the plug from the socket by means of the mains lead!· Do not use the appliance if: ­ the mains lead is damaged, ­ the casing shows signs of damage · Never put water into the appliance when it is hot!Switch the coffee machine off and leave it to cool for approx. [. . . ] The display (green) for 2-4 cups (Figure 2b/D) is illuminated. 0 Press the on/off button (Figure 2b/A), to start the brewing procedure. The indicator (red) (Figure 2b/B) is illuminated and the brewing procedure will start. The selected quantity "2-4 cups" can be cancelled by pressing the aroma button again or by pressing the on/off button. Once the brewing procedure is complete and you no longer require the warming plate function, switch the appliance off by again pressing the on/ off button. Auto shut off Your coffee machine has a safety cutout. If the appliance is not used for 2 hours after the brewing procedure has started, it switches off automatically for safety reasons and also to save energy. The indicator (red) will go out (Figure 2b/B) Inserting filter paper (Figure 7) 0 Place size 4 filter paper in the filter insert. First fold the perforated sides. Put in ground coffee (Figure 8) Please use ­ "medium" ground coffee. The amount of ground coffee used depends on taste. 6-7 g) per cup is sufficient for a medium strength coffee. Placing the coffee jug on the warming plate 0 Place the coffee jug on the warming plate. 0 Press the AUTO-START button (Figure 2c/D). The display for AUTO-START (Figure 2c/E) is illuminated. The programmed start time will go out in the display and the current time will reappear. The brewing procedure will start automatically at the starting time you have programmed. The indicator (red) (Figure 2c/F) is illuminated. To check the programmed start time, press the programme button (Figure 2c/H). The start time will appear in the display (Figure 2c/A). After a few seconds it will go out and the current time will reappear. If you wish to cancel the selected start time, press the button for AUTO-START (Figure 2c/D). The green display for AUTO-START (Figure 2c/E) will go out. Important: If there is a brief power failure of up to 5 seconds the data remains stored. [. . . ] For descaling use a liquid, environmentally-friendly descaling agent available generally at retail outlets. Only use it in accordance with the manufacturer's instructions. Do not use a formic acid based descaler. 0 First fill the fresh water container with water. [. . . ]