User manual AEG-ELECTROLUX KG6.04 SS

[. . . ] and please pass it to any future owner of the appliance. We wish you much joy with your new appliance. SAFETY INFORMATION INSTALLATION INSTRUCTIONS PRODUCT DESCRIPTION OPERATING INSTRUCTIONS Activation and deactivation Automatic Switch Off The heat setting Automatic Heat Up Power function Timer 43 44 47 48 48 48 49 49 49 50 STOP+GO Lock The child safety device HELPFUL HINTS AND TIPS CARE AND CLEANING WHAT TO DO IF. Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before the installation and use. [. . . ] ⷠBond the seal stripe supplied on the upper surface of the rabbet along the edges of the cut out section. ⷠCut the seal stripe into four pieces in relation to the length of the edges of the rabbet. ⷠFor the four corners of the rabbet the ends of the seal stripes must be cut into mitres. Bond the seal stripe flush into the corner of the rabbet. Make sure that no silicon compound can get below the glass ceramic when grouting. If you use a protection box (the additional accessory), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. It shows the heat setting It shows for which zone you set the time It shows the time in minutes It increases or decreases the heat setting It activates the Power function It increases or decreases the time It selects the cooking zone Not correct cookware or too small cookware or no cookware on the cooking zone. The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. Touch for 1 second to activate or deactivate the appliance. You do not set the heat setting after you activate the appliance. ⷠTo deactivate the Timer: set the cooking zone with and touch to deactivate the Timer. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch You can use the Timer as a minute minder while the cooking zones do not operate. When the time comes to an end, the sound operates and 00 flashes · When operates, you cannot change the heat setting. The heat setting that you set before comes on. When the cooking zones operate, you can lock the control panel, but not . it prevents an accidental change of the heat setting. The heat setting that you set before comes on. When you stop the appliance, you also stop this function. To override the child safety device for only one cooking time · When you deactivate the appliance with , the child safety device operates again. Use the induction cooking zones with correct cookware. [. . . ] You put something on one or more sensor fields. A sound operates when the appliance is deactivated. The residual heat indicator does The cooking zone is not hot because it operated only for a short not comes on. If the cooking zone should be hot, speak to the service centre. [. . . ]