User manual AEG-ELECTROLUX KRC 4330 DVB-T

[. . . ] Kitchen Entertainment Centre with DVB-T 2) 1 LCD display 2 TV/AUX: Switch between DVB-T and AUX 3 FM: Switch to FM radio 4 MEMORY: Storing FM radio stations 5 CLOCK/ALARM: Show/set clock and alarm time 6 SLEEP/SNOOZE: Activate sleep timer and snooze 7 EQ: Choose sound settings 8 TIMER: Activate timer alarm 9 SKIP-/TUNE-: Time settings/downward FM search/skip through radio stations 10 SKIP+/TUNE+: Time settings/Upward FM search/Skip through radio stations 11 USB port 12 VOL-: Decrease volume/Move cursor leftward/ Move to the left in the zoomed picture 13 CH+: Change channels upward/Move cursor upward/Move upward in zoomed picture 14 VOL+: Increase volume/Move cursor rightward/Move to the right in the zoomed picture 15 MENU: Bring up DVB-T menu 16 CH-: Change channels downward/Move cursor downward/Move downward in the zoomed picture 17 Power indicator light 18 IR: Receiver for remote control signals 19 STANDBY: Turn on or switch to Standby 20 OK: Confirm menu or menu item/Bring up channel list 21 AII: Pause TV picture or music/film file. Pressing again resumes play 22 EXIT: Leave menu or menu item 23 P. ADJ: Bring up picture settings menu 24 LCD display 25 TV ANT: TV antenna input 26 VIDEO: Auxiliary video input 27 AUDIO R/L: Auxiliary audio input 28 DC +12V: Power supply input (optional) 29 FM ANT: FM antenna 30 Battery compartment 31 LCD release button 32 Breaker contact for LCD display Remote control (Fig. 10 CLOCK: Show/set clock and alarm time 11 ALARM SET 1: Turn Alarm Time 1 on or off 12 GUIDE: Opens the 9-panel preview window 13 ALARM SET 2: Turn Alarm Time 2 on or off 14 SEARCH: Activates automatic channel search in DVB-T mode. [. . . ] Enter the old password (PIN) using the numercal keys. Enter the new password using the numercal keys. In the "Password", you can carry out the following settings: · Menu Lock (Setup Menu Lock), In this menu you can set whether the password has to be entered in order to call up the SETUP menu. Child Lock In the "TV/TV List" menu (see page 30) you can block individual channels. With the "channel lock" function you can switch this lock on and off. If you would like to switch on the child lock, select the "on" option. If you would like to switch off the child lock, select the "off" option. All of your settings and stored data are deleted. You will be prompted to confirm your selection. Press the "OK" button if you would like to return the receiver back to the factory settings. Press the "EXIT" key to return to the TV channel. Adjust the "time zone" relative to the main time zone (GMT) according to where you live. NOTE: The "Date" and "Time" cannot be set manually until the option "Off" is selected in the "GMT Usage" menu. User interface on the TV screen You may carry out individual settings on your receiver via the user interface menus. Select the main menu you require with the " VOL+" and " VOL-" buttons. Structure of the sub-menus Top: Name of the menu Left: Menu options Bottom: The information strip shows you the buttons with which you can move within the current menu or make adjustments. Basic operating steps Switching between radio and TV mode To switch between radio mode and TV mode, press the "DTV/MODE" key. nOTE: Radio programmes are not offered in all broadcast areas. Please ask programme providers and in specialist shops for more information. selecting channel To change to the previous or next channel press the "CH-"and"CH+"arrowkeysorthe "CH+ , CH-"keysatthereceiver. You may also switch directly to a station by entering the memory space number of the station using the numerical keys. ­ install new software, if necessary, by USB stick. [. . . ] Use the number and arrow buttons to enter the desired search term. the search by pressing the "OK" button. Start The device searches through the teletext of the channel that is set for the search term. The search has finished you can use the After arrow keys "CH+, CH-"toselecttheteletext pages found. [. . . ]