User manual AEG-ELECTROLUX L 60260 FL

[. . . ] L 60260 FL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 6 7 7 8 11 14 14 14 15 16 17 19 21 26 29 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. AT THE END OF THE PROGRAMME The appliance stops automatically. The indicator of the Start/Pause button 4 goes off. · Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. · · · · · Remove the laundry from the appliance. · Keep the door ajar, to prevent mildew and odours. The washing programme is completed, but there is water in the drum: ­ The drum turns regularly to prevent the creases in the laundry. ­ You must drain the water to open the door. 18 To drain the water: 1. When the programme is completed and the door lock symbol goes off, you can open the door 4. The appliance drain and spin automatically after approximately 18 hours. ENGLISH 19 HINTS AND TIPS THE LAUNDRY LOAD · Divide the laundry in: white, coloured, synthetics, delicates and wool. [. . . ] Use the key supplied with the appliance. Pull out the plastic spacers. ENGLISH 31 12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag. ­ We recommend that you keep the packaging and the transit bolts for when you move the appliance. [. . . ]