User manual AEG-ELECTROLUX L60621

[. . . ] 132996350. qxd 19/06/01 9. 44 Pagina 1 (Nero/Process Black pellicola) LAVAMAT L 60621 Der umweltschonende Waschvollautomat The environmentally friendly washing machine Benutzerinformation Instruction booklet LAVAMAT PRELAVADO 850 700 PUERTA PRELAVADO LAVADO ACLARADOS ACLARADO ADICIONAL TIEMPO CENTRIFUGADO RESTANTE FIN SOBREDOSIFICACION CENTRIF. DELICADO CENTRIFUGADO DESCARGA SUAVIZANTES ACLARADOS FRIO ANULACION/ PARADA 95 ALGODON Y LINO ECONOMIA REMOJO 600 400 AGUA EN LA CUBA MARCHA/ PAUSA 60 50 40 LAVADO RAPIDO 30 FRIO LANA 30 40 FRIO L 60688 MANCHAS ARRANQUE RETARDADO 30 40 40 FRIO 40 60 50 SINTETICOS DELICADOS FACIL DE PLANCHAR AUS ERFAHRUNG GUT 132996350. qxd 19/06/01 9. 44 Pagina 47 (Nero/Process Black pellicola) Contents Safety instructions . 51 Main features of your washing machine . 59 Altering a programme which is running . [. . . ] Selecting the option AGUA EN LA CUBA (RINSE HOLD) the laundry is left immersed in the final rinse water. If the spin speed is not reduced, the final spin speed will be as follows: - cottons 1000 r. p. m. - wool (hand washing) 800 r. p. m. 1000 800 600 400 AGUA EN LA CUBA 66 132996350. qxd 19/06/01 9. 44 Pagina 67 (Nero/Process Black pellicola) How to wash EXTRA RINSE This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse). The extra rinse is available only with the cotton, synthetics or delicate programme. Selection of the EXTRA RINSE option Press simultaneously the buttons PRELAVADO and LAVADO RAPIDO for about 2 seconds: the light ACLARADO ADICIONAL comes on in the programme progress display. To remove it press the same buttons again until the light ACLARADO ADICIONAL comes off. Select the DELAY START option To delay starting of a programme, press the DELAY START button ARRANQUE RETARDADO before starting the machine. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display. If the button REMOJO (SOAK) has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes. When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown. 67 132996350. qxd 19/06/01 9. 44 Pagina 68 (Nero/Process Black pellicola) How to wash Starting the programme 1. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light PUERTA is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time. · Load other laundry: press the START/PAUSE button. Close the door and press the START/PAUSE button again. · Modify or cancel the delay time: press the START/PAUSE button. Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again. Programme progress display PRELAVADO LAVADO PREWSH WASH RINSES EXTRA RINSE SPIN END By selecting the wash programme, the pilot lights corACLARADOS responding to the various phases making up the pro- ACLARADO gramme come on. After the machine has started, only ADICIONAL CENTRIFUGADO the running phase pilot light stays on. SOBREDOSIFICACION FIN OVERDOSAGE Display The time to the end of the programme decreases minute by minute and appears on the display. At the end of the programme The machine stops automatically. [. . . ] 83 132996350. qxd 19/06/01 9. 44 Pagina 84 (Nero/Process Black pellicola) Installation Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. · Before placing it on small tiles, apply a rubber coating. · Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine. [. . . ]