User manual AEG-ELECTROLUX LAVAMAT 75479 FL

[. . . ] L 75479 FL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 6 7 7 8 11 13 13 14 14 16 17 18 20 25 28 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY USING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLE SHOOTER AND SERVICE INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. INTERRUPT A PROGRAMME 1. The washing programme continues. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. The programme starts. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. The door lock symbol in the display goes off. Open the appliance door. CHANGE A FUNCTION You can change only some functions before they operate. ENGLISH 17 3. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. Make sure that no water is in the drum. If you deactivate the appliance, it is necessary to set the programme again. AT THE END OF PROGRAMME The appliance stops automatically. In the display The indicator of the Start/Pause button 4 goes off. · Press button 1 to deactivate the appliance. [. . . ] Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. Pull out the plastic spacers. 30 12. Replace the plastic spacers with the plastic caps. [. . . ]