User manual AEG-ELECTROLUX L7547EXFL

[. . . ] L 7547 EXFL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 6 7 7 8 11 14 14 14 14 16 17 18 20 25 28 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice. ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 2. Press button 4 to start the programme. The indicator of button 4 is on. CHANGE A FUNCTION You can change only some functions before they operate. 1. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. Press button 4 . Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. INTERRUPT A PROGRAMME 1. The washing programme continues. ENGLISH 17 Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. 2. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. Press button 4 . The door lock symbol in the display goes off. AT THE END OF THE PROGRAMME · The appliance stops automatically. · The indicator of the Start/Pause button 4 goes off. · Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. [. . . ] 8. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. 1 2 9. Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. 11. Pull out the plastic spacers. 30 12. [. . . ]