User manual AEG-ELECTROLUX L75680FL

[. . . ] L 75680 FL EN WASHING MACHINE USER MANUAL 2 www. aeg. com CONTENTS 4 5 7 8 15 16 16 19 20 22 27 30 SAFETY INFORMATION TECHNICAL INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE AT THE END OF THE PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] Make sure that the flap does not cause a blockage when you close the drawer. SETTING AND STARTING A PROGRAMME 1. The related programme indicator comes on. CANCEL A PROGRAMME 1. The indicator of button 4 flashes with red colour. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. 5. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 2. Press button 4 to start the programme. The indicator of button 4 is on. CHANGE A FUNCTION You can change only some functions before they operate. 1. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. Press button 4 . Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. INTERRUPT A PROGRAMME 1. The washing programme continues. ENGLISH 19 Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. 2. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. [. . . ] 8. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. 1 2 9. Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. 11. Pull out the plastic spacers. 32 www. aeg. com 12. [. . . ]