User manual AEG-ELECTROLUX L76670FL

[. . . ] L 76470 FL L 76670 FL EN User manual 2 www. aeg. com CONTENTS 1. 26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. [. . . ] 6. Measure out the detergent and the fabric conditioner. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 3. 9. 3 Setting and starting the programme 1. The related programme indicator comes on. The indicator of button 4 flashes with red colour. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. ENGLISH 17 5. Press button 4 to start the programme. The drain pump can operate for a short time when the appliance fills water. 9. 8 Cancel the delay start 1. Press button 5 again and again until the display shows 0’. The programme starts. 9. 4 Interrupt a programme 1. The washing programme continues. 9. 9 Open the door While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. 9. 5 Cancel a programme 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 2. Press button 4 . The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. 9. 6 Change a function You can change only some functions before they operate. 1. Press button 4 . Change the function set. 9. 7 Set the delay start 1. Press button 5 again and again until the display shows the number of minutes or hours. [. . . ] Store it at room temperature for 24 hours before using for the first time. ENGLISH 29 13. 3 Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units • Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. x4 • The appliance must be level and stable. CAUTION! [. . . ]