User manual AEG-ELECTROLUX L76674EFL

[. . . ] L 76474 EFL L 76674 EFL EN User manual 2 www. aeg. com CONTENTS 1. 31 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. [. . . ] To change the temperature and/or the spin speed, press the related buttons. 16 www. aeg. com 4. Set the available functions. The indicator of the set function comes on or the display shows the related symbol. The drain pump can operate for a short time when the appliance fills water. 9. 8 Cancel the delay start 1. Press button 5 again and again until the display shows 0’. The programme starts. 5. 9. 9 Open the door While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. 9. 4 Interrupt a programme 1. The washing programme continues. 9. 5 Cancel a programme 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. Press button 4 . The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. 2. 9. 6 Change a function You can change only some functions before they operate. 1. Press button 4 . Change the function set. 9. 7 Set the delay start 1. 9. 10 At the end of the programme • The appliance stops automatically. • The indicator of the Start/Pause button 4 goes off. • Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. [. . . ] Store it at room temperature for 24 hours before using for the first time. 28 www. aeg. com 13. 3 Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units • Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. x4 • The appliance must be level and stable. CAUTION! [. . . ]