User manual AEG-ELECTROLUX L76676FL

[. . . ] L 76676 FL EN User manual 2 www. aeg. com CONTENTS 1. 25 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. [. . . ] Make sure that the flap does not cause a blockage when you close the drawer. 9. 3 Setting and starting the programme 1. The related programme indicator comes on. Press button 4 . The washing programme continues. The indicator of button 4 flashes with red colour. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. 5. 9. 5 Cancel a programme 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 2. Press button 4 to start the programme. The drain pump can operate for a short time when the appliance fills water. 9. 6 Change a function You can change only some functions before they operate. ENGLISH 17 1. Press button 4 . Change the function set. If you deactivate the appliance, it is necessary to set the programme again. 9. 7 Set the delay start 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. 9. 10 At the end of the programme • The appliance stops automatically. • The indicator of the Start/Pause button 4 goes off. • Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. • Remove the laundry from the appliance. • Keep the door ajar, to prevent mildew and odours. The washing programme is completed, but there is water in the drum: – The drum turns regularly to prevent the creases in the laundry. [. . . ] Store it at room temperature for 24 hours before using for the first time. 13. 3 Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units • Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. x4 • The appliance must be level and stable. ENGLISH 29 CAUTION! [. . . ]