User manual AEG-ELECTROLUX LAV2045UB

[. . . ] This symbol guides you step by step in operating the unit. 2. . . . 3 2 After this symbol you will find detailed information on operation and practical use of the unit. The clover leaf indicates tips and information on the economical and environmentally-responsible use of the unit. This user information contains information on remedying any faults which may occur, see the section "What to do if . . . ". Printed on recycled paper. [. . . ] To open the detergent/additives drawer: grasp the flap under the drawer (1) and pull the drawer out (2) till it reaches the stop. 3 2. Compartment for main wash powder detergent (If you use a water softener and need the right-hand compartment for the pre-wash detergent/stain treatment agent, add the water softener to the left-hand compartment with the main wash detergent. ) Compartment for liquid additives (softeners, wash-care products to preserve the shape of garments, starch) Important!Do not fill the compartment past the MAX mark. Concentrated additives can be diluted to the MAX mark, dissolve powder starch. Note: A small amount of water remaining in the liquid additives compartment is normal and does not affect rinsing results. Compartment for pre-wash detergent/ in-wash stain treatments For the additional PRE-WASH (VORWÄSCHE, PRELAVAGE) or STAIN (FLECKEN, TACHES) programme functions only. Push the drawer in fully. 3 If using liquid detergents/tablets: Add liquid detergent or tablets using the measure provided with the product. Follow the manufacturer's instructions on the packaging. 19 Instructions for use Setting the Wash Programme For the correct programme, temperature and additional programme functions suitable for each type of washing, see "Programme Tables". Set the programme knob to the desired programme and temperature. 3 2. Select any additional programme functions: The indicator light for the selected additional programme function comes on. Press the QUICK WASH (KURZ, COURT) or STAIN (FLECKEN, TACHES) button. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again. Changing the Spin Speed Spin speed can still be changed or RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) set, while the programme is running. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button. Change the spin speed with the Spin Speed/RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) button. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again. The wash programme continues. 22 Instructions for use End of Wash Cycle/Removing the Washing When a wash cycle is completed, the END (ENDE, FIN) light on the Programme Progress Display comes on. If RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) was selected, the indicator lights DOOR (TÜR, PORTE) and END (ENDE, FIN) come on. After a Rinse Hold, the water must first be drained: ­ Either turn the programme knob to OFF (AUS, ARRET), then to DRAIN (PUMPEN, VIDANGE) and press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button (the water is drained without spinning), or ­ turn the programme knob to OFF (AUS, ARRET), then to SPIN (SCHLEUDERN, ESSORAGE) and press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button (the water is drained and the washing is given a spin; the spin speed can be altered during the spin). When this stage of the programme is completed, the END (ENDE, FIN) light comes on. The door can be opened after the DOOR (TÜR, PORTE) light goes off and the END (ENDE, FIN) light has come on. [. . . ] which may find their way into the washing machine along with the washing will remain in the drain pump housing (foreign objects are protected by the pump wheel). To restart the drain pump when it is blocked, please proceed as follows: Warning!Switch off the washing machine and remove the mains plug before cleaning the drain pump!First carry out an emergency emptying procedure (see section "Carrying out emergency emptying"). [. . . ]