User manual AEG-ELECTROLUX LAV6450SENS.

[. . . ] This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance. Installation q q Check your dishwasher for any transport damage. If your dishwasher is damaged, you should contact your supplier. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. [. . . ] Press the programme buttons 2 and 3, the integrated indicator lights of programme buttons 1, 2 and 3 start flashing. Filling with rinse aid 1. Open the container by pressing the release button (A). Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max". BR10 BR16 Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e. g. dishwasher cleaning agent, liquid detergent). Press programme button 2, the integrated indicator lights of programme buttons 1 and 3 turn off, while the upper integrated indicator light of programme button 2 goes on flashing. At the same time the lower integrated indicator light of programme button 2 illuminates indicating that the rinse aid dispenser is active. To deactivate the rinse aid dispenser, press the programme button 2 again, the lower integrated indicator light of programme button 2 turns off, indicating that the rinse aid dispenser has been deactivated. Light items (plastic bowls etc. ) must be loaded in the upper basket and arranged US47 so they do not move. Removable knife basket Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket, which is positioned at the rear of the upper basket. UI53 Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking together. For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it). The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. To reassemble, reverse the procedure. In case that plates are loaded in the upper basket: load them starting from the rear positions of the basket; tilting them slightly forwards and avoiding the front positions near the door. US71 Before closing the door, ensure that the spray arms can rotate freely. UI63 UI62 12 Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in upper basket lower basket Use of detergent Only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging. With upper basket raised With upper basket lowered 20 cm 24 cm 31 cm 27 cm Fill with detergent To move to the higher position proceed as follows: 1. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable. If the lid is closed: press release button (1). [. . . ] The water drain hose has not been correctly laid or it is bent or squashed. Anti-flood device has activated. Close the water tap and contact the Service Force Centre. Once the checks have been carried out, close the dishwasher's door and press the On/Off button, the programme will continue from the point in which it was interrupted. If the fault code reappears contact your Service Force Centre. For other combinations of fault codes not described in the above chart will appear, please contact your Service Force Centre. . . . there are problems when operating the dishwasher Fault Possible cause The dishwasher door has not been properly closed. [. . . ]