User manual AEG-ELECTROLUX LAV70230-W

[. . . ] KO-LAVAMAT 70630 update The environmentally friendly washing machine User information Dear Customer, Please read this user information carefully. Pay particular attention to the section "Safety" on the first Info pages. Please keep this user information in a safe place for later reference. Pass it on to any future owners of the unit. 1 The warning triangle and /or signal words (Warning!, Caution!, Important!) emphasise information which is important for your safety or for the unit's functional reliability. [. . . ] If the fault code is displayed again, inform the Customer Service. In the case of all other displayed faults (E and number or letter), please inform the Customer Service, stating the fault code. Problem Possible Cause The mains plug is not plugged in. The fuse of the building's wiring is not in order. The filling door is not correctly closed. Close the filling door; The lock must engage audibly. Press the O/s (START/ O/s (START/PAUSE) butPAUSE) button until the proton not pressed long enough. Cancel the child safety feaThe child safety feature is set ture (see Section "Child Safety Feature"). Restart the program. The fault code E40 appears. The display The filling door is not corl (MAIN WASH) rectly closed. flashes. 30 Operating Instructions Problem Possible Cause Water valve closed. Filter in screw connection of The fault code E10 apthe intake hose blocked. Water tap is blocked with limescale or is faulty. The transport packaging has not been removed. The height-adjustable screw feet are not correctly set. Unscrew the hose from the tap, remove the sieve and clean under running water Check water tap and have it repaired if necessary. Remove transport packaging according to the installation and connection instructions. Adjust the feet according to the installation and connection instructions. The washing machine There is not much washing in This does not impair the opvibrates during opera- the drum (e. g. tion or it is on an une- dressing gown). Check the laying of the The water could not be comdrainage hose and eliminate pletely pumped off before the bend if necessary, or spinning because clean the solution pump and, The drainage hose is bent or if required, remove foreign The solution pump is bodies from the pump housblokked. The washing solution of the main wash froths up a lot. Too much detergent was probably used Meter the detergent exactly in accordance with the manufacturer's information. 31 Operating Instructions Problem Possible Cause Remedy The screw connection on the Tighten the intake hose intake hose is leaky. The washing solution pump cover is not correctly closed. Water runs out under the washing machine. [. . . ] 132 1000 Ljubljana Tel. : 61 1234 137 Fax: 61 1234 238 Singapore Japan Arzbergh Engineering Electrolux Japan Ltd. Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07 Singapore 247909 Heiwajima Ota-Ku Tel. : 65 7356572 Tokyo Fax: 7351124 Tel. : 81 3 3544 3363 Fax: 81 3 3763 6143 Thailand OLYMPIA Thai Ltd. 44 Ratchadapisek Road 10320 Bangkok Tel. : 2 513 6111 Fax: 2 513 2574 Hungary Electrolux Lehel KFT (AEG Div) Erzsebet'Kiralyne Utja 87 1142 Budapest Tel. : 00361/251 84 44 Slovakia Rep. Seberiniho 1 821 03 Bratislava Tel. : 7 4333 9745 Fax: 7 4333 6976 USA ANDI Co. [. . . ]