User manual AEG-ELECTROLUX LAV72600-WGB

[. . . ] 263740. bk : 263740ti Seite 1 Dienstag, Juni 17, 1997 11:59 AM ÖKO-LAVAMAT 72600 update The environmentally friendly washing machine Operating instructions 263740. bk : sg01_uk Seite 2 Dienstag, Juni 17, 1997 11:59 AM Dear customer, Please read these operating instructions through carefully, before using the appliance. Please ensure you fully understand the safety instructions on the first pages of these operating instructions!Retain the operating instructions for future reference, and pass them on to any future owners. If you require assistance or advice on your appliance, please contact our customer care department by letter or telephone: 1 The warning triangle and/or the key words (Warning!, Caution!, Attention!), emphasizes information which is important for your safety or the correct functioning of the appliance. [. . . ] 0 Switch off the washing machine: set the program selector to OFF. 0 We recommend you turn off the water supply when the wash program has finished. 20 263740. bk : 263740 Seite 21 Dienstag, Juni 17, 1997 11:59 AM Run wash cycle Setting the washing program See "Program tables" for suitable program, correct temperature and any possible program options for the respective type of washing. 0 Set washing program and temperature: set program selector to the washing program desired with the required temperature. The estimated duration of the program set is shown in minutes on the multidisplay. 3 0 If applicable select program options: The displays of the program options selected lights up. To change your selection press another button. To deselect simply press the button again. 0 If required change the spin speed for the final spin/ rinse hold: Press the final spin speed/RINSE HOLD button repeatedly until the display of the required spin speed or RINSE HOLD illuminates. With RINSE HOLD the washing stays in the final rinse water, it is not spun. 0 If applicable set the delay timer: press the DELAY TIMER button repeatedly until the time delay required is displayed, for example 12h for a 12 hour delay start of the program. 3 If 19h is displayed and you press the button again the running time of the currently set washing program appears and the delay start is cancelled. When the SOAKING option is selected the delay timer determines the soaking time. (Without delay timer the soaking time is approx. 1 hour. ) 21 263740. bk : 263740 Seite 22 Dienstag, Juni 17, 1997 11:59 AM Run wash cycle Loading the washing 0 Sort the washing according to the type and prepare it correctly. For information about the correct preparation of the washing see "Types of washing and care symbols". 0 Open the door: pull at the handle of the door. 0 Load the washing. 3 3 See the "Program tables" for the maximum load. 0 Firmly shut the door. When shutting the door be careful not to catch any pieces of washing!The fabric and machine could be damaged. 22 263740. bk : 263740 Seite 23 Dienstag, Juni 17, 1997 11:59 AM Run wash cycle Adding washing powder/fabric softener 0 Open the compartment: reach into the recess under the compartment, pull the compartment out as far as it will go. 0 Fill in washing powder/fabric softener. 3 For information about washing powder and fabric softeners see section "Washing powder and conditioners". k Prewash agent/soaking agent (for extra programs PRE WASH/SOAKING), or water softening agent if used. (If you use water softening agent and need compartment k for the prewash/soaking agent, add the water softening agent to the main detergent compartment l. ) l Main detergent in powder form m Stain remover (only for STAIN program) w Liquid conditioners (fabric softener, starch). Important: Do not fill above the MAX mark. When using thick concentrated fabric conditioners and starches we recommend you dilute the concentrate with water to ensure trouble-free dispensing. If using starch powder dissolve according to manufacturers instructions. 23 263740. bk : 263740 Seite 24 Dienstag, Juni 17, 1997 11:59 AM Run wash cycle Starting the washing program 0 Check the water tap is open. 0 Start the washing program: Press START/PAUSE button. [. . . ] This can be set with the extra water switch: Position 1: Suds cooling The suds are cooled down before being pumped out at the end of the main wash (by adding cold water). This reduces thermal shock to fabrics, helping to prevent creasing. (This setting is only effective for COTTONS/LINEN at a temperature of above 40 °C. ) Position 2: Suds cooling and extra rinse The water is cooled down as for position 1, in addition to this (except for WOOLLENS) an extra rinse cycle is carried out. On delivery of the machine the extra water switch is in the 0 position. 3 Due to the process of cooling down the suds or an extra rinse cycle, the water consumption and wash time is increased. Setting: 0 Pull the washing powder compartment out until the extra water switch on the left of the frame is accessible. [. . . ]