User manual AEG-ELECTROLUX LAV72640

[. . . ] KO-LAVAMAT 72640 update The environmentally friendly washing machine User information Dear Customer, Please read this user information carefully. Pay particular attention to the section "Safety" on the first Info pages. Please keep this user information in a safe place for later reference. Pass it on to any future owners of the unit. 1 The warning triangle and /or signal words (Warning!, Caution!, Important!) emphasise information which is important for your safety or for the unit's functional reliability. [. . . ] Do not clean the stainless steel drum with decalcifying agents containing acids, scouring agents containing chlorine or iron, or steel wool. Our Customer Service can provide suitable agents. Remove any rust deposits on the drum using a stainless steel cleaning agent. 0 Main door 0 Check on a regular basis to see if deposits or foreign objects are present in or at the rubber sleeve behind the door, and remove. 30 Operating Instructions What to do if. . . Remedying faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you use the Customer Service to remedy one of the faults listed here or to remedy an operating fault, the customer service technician's visit will be subject to a charge, even during the warranty period. If the fault code E10, E20 or E40 is shown in the multi display, you may be able to remedy the fault yourself (see the Faults table below). After remedying the fault, press the O/s (START/PAUSE) button. If the fault code is displayed again, inform the Customer Service. In the case of all other displayed faults (E and number or letter), please inform the Customer Service, stating the fault code. Problem Possible Cause The mains plug is not plugged in. The fuse of the building's wiring is not in order. The filling door is not correctly closed. Close the filling door; The lock must engage audibly. Press the O/s (START/ O/s (START/PAUSE) butPAUSE) button until the proton not pressed long enough. Cancel the child safety feaThe child safety feature is set ture (see Section "Child Safety Feature"). Restart the program. The fault code E40 appears. The display The filling door is not corl (MAIN WASH) rectly closed. flashes. 31 Operating Instructions Problem Possible Cause Water valve closed. Filter in screw connection of The fault code E10 apthe intake hose blocked. Water tap is blocked with limescale or is faulty. The transport packaging has not been removed. The height-adjustable screw feet are not correctly set. Unscrew the hose from the tap, remove the sieve and clean under running water Check water tap and have it repaired if necessary. Remove transport packaging according to the installation and connection instructions. Adjust the feet according to the installation and connection instructions. The washing machine There is not much washing in This does not impair the opvibrates during opera- the drum (e. g. [. . . ] Seberiniho 1 821 03 Bratislava Tel. : 02 4333 4322, 4355 Fax: 02 4333 6976 USA ANDI Co. East 65 Campus Plaza Edison, New Jersey 0837 USA/Tel. : (201) 2258839 South Africa AEG (Pty) Ltd. Box 1 02 64 Kew/Johannesburg 2000 Tel. : 8069111 Syria Masri & Shami P. O. Box 24 96 Damascus Tel. : 214080 51 Warranty conditions / Customer service centres 52 53 Index Index A Abort program . [. . . ]