User manual AEG-ELECTROLUX LAV74630-WGB-

[. . . ] ÖKO-LAVAMAT 74630 update The environmentally friendly washing machine User information Dear Customer, Please read this instruction book carefully before using the appliance. Please ensure you fully understand the safety instructions on the first pages of this instruction book. Retain the instruction book for future reference, and pass it on to any future owners. 1 The warning triangle and / or key words (Warning!, Caution!, Important!) give information that is important for your safety or the function of the appliance is highlighted. It is imperative that this information is observed. 0 1. [. . . ] Any objects left in the laundry which are likely to rust can stain the drum. Do not clean the stainless steel drum with descaling agents containing acids, scouring agents containing chlorine or iron, or steel wool. Your local AEG Service Force Centre has suitable agents available. Remove any rust stains on the drum using a stainless steel cleaning agent. 0 Main door 0 Regularly check to see if there are deposits or foreign objects in the rubber seal behind the door, and remove them. 28 Operating Instructions What to do if. . . Trouble Shooting If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee. · If the fault code E10, E20 or E40 is shown in the multi-display, you may be able to remedy the fault yourself (see the Faults table below) . After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre. · For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code. Problem Possible Cause The mains plug is not plugged in. START/PAUSE button not pressed long enough. Close the door; The lock must engage audibly. Keep the START/PAUSE button pressed until the program begins. Cancel the child safety feaDoor cannot be closed. The child safety feature is set ture (see Section "Child Safety Feature"). The display RINSE + flashes The door is not correctly closed. Open the water tap. Close the water tap. Unscrew Filter in screw connection of the hose from the tap, remove the filter and clean the inlet hose is blocked. under running water 29 Operating Instructions Problem Possible Cause Remedy Adjust the feet according to the installation and connection instructions. The machine is not level. The washing machine vibrates during operation or is unstable. There is very little washing in This does not impair the the drum (e. g. The water could not be completely pumped out before spinning because the drainage hose is kinked or the drain pump is blocked. Check the the drain hose and remove any kink if necessary, or clean the drain pump and, if required, remove foreign bodies from the pump housing. It may be necessary to reduce the amount of deterExcessive foaming dur- Probably too much detergent gent used. gent manufacturer's recommendations. The screw connection on the Tighten the inlet hose screw inlet hose is leaking. connection The drainage hose is leaking. [. . . ] European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: ­ The guarantee starts from the date you first purchased your product. ­ The guarantee is for the same period and to the same extent for labour and parts as exist in the new country of use for this brand or range of products. ­ This guarantee relates to you and connot be transferred to another user. ­ Your new home is within the European Community (EC) or European Free Trade Area. [. . . ]