User manual AEG-ELECTROLUX LAV74740-W

[. . . ] ÖKO-LAVAMAT 74740 update The Environmentally-Friendly Washing Machine User Information Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). [. . . ] Do not clean the stainless steel drum with acidic antiliming agents, scouring agents containing chlorine or iron or steel wool. Our Customer Service Department has suitable agents available. Remove any rust deposits on the drum using a stainless steel cleaning agent. 0 Filling Door 0 Check regularly whether there are deposits or foreign bodies in the rubber sleeve behind the filling door and, if so, remove them. 32 Instructions for use What to do if . . . Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. · If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below). After remedying the fault, press the button START/PAUSE (START/ PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform Customer Service. · In the case of all other displayed faults (E and number or letter), please inform the Customer Service and state the fault code. Problem Possible Cause The mains plug is not plugged in. The fuse of the building's wiring is not in order. The filling door is not correctly closed. The button START/PAUSE (START/ PAUZE, MARCHE/ PAUSE) was not pressed for long enough. The filling door cannot The child lock is set. The indicator MAIN WASH (HOOFDWAS, LAVAGE) flashes. Close the filling door; the lock must engage audibly. Press the button START/ PAUSE (START/ PAUZE, MARCHE/PAUSE) until the program begins. Cancel the child lock (see section "Child Safety Feature"). Restart the program. The filling door is not correctly closed. 33 Instructions for use Problem Possible Cause Water valve is closed. The indicator RINSE+ (SPOELEN+, RINCAGE+) flashes. Remedy Open the water valve. Close the water valve. Unscrew the hose from the waFilter in screw connection of ter valve, remove the filter the intake hose is blocked. Water tap is blocked with limescale or is faulty. The transport safeguard has not been removed. [. . . ] Non-essential or requested adjustments are not covered by the guarantee and are not possible in all cases. Our consumer services department is always at your disposal, even after the guarantee period has expired. Address for our consumer services department: ELECTROLUX HOME PRODUCTS BELGIUM Bergensesteenweg, 719 - 1502 LEMBEEK Tel. : 02. 363. 04. 44 53 Customer services Customer services Belgium Tel. : Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Province de Liège: S. D. E. Rue Gaucet 26 4020 Liege Fax. : Consumer services 02/363. 04. 44 02/363. 04. 00 02/363. 04. 60 04/343. 11. 60 04/343. 47. 68 54 55 56 57 Index Index A Aqua Control . [. . . ]