User manual AEG-ELECTROLUX LAV86760

[. . . ] ÖKO-LAVAMAT 86741 update The environmentally friendly washing machine User information Dear Customer, Please read this instruction book carefully before using the appliance. Please ensure you fully understand the safety instructions on the first pages of this instruction book. Retain the instruction book for future reference, and pass it on to any future owners. 1 The warning triangle and / or key words (Warning!, Caution!, Important!) give information that is important for your safety or the function of the appliance is highlighted. It is imperative that this information is observed. 0 1. [. . . ] · If the fault code C1 or C2 is shown in the multi-display, you may be able to remedy the fault yourself (see the Fault table below). After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre. · For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code. Problem Possible cause The mains plug is not plugged in. Washing machine does Door is not properly closed. Close door; Lock must engage audibly . Keep the START/PAUSE butSTART/PAUSE button has not ton pressed until the probeen pressed long enough. Cancel child safety feature (see section , , Child safety feature"). Disconnect Filter in the socket of the inhose from water tap, remove let hose connection is filter and clean under blocked. Water tap is blocked with limescale or is faulty. Check the water tap and have it reaired if necessary. 32 Operating Instructions Problem Possible cause Transport packaging has not been removed. Remedy Remove transport packaging according to setting up and connection instructions. Adjust the feet according to installation and connection instructions. The machine is not level. Washing machine viThere is very little washing in brates during operation the drum (e. g. only a dressing This does not affect the operation of the machine. Water could not be fully pumped out before spinning because the drain hose is kinked or water pump is blocked. Check the drain hose and remove any kink if necessary, or clean the drain pump and, if necessary, remove foreign bodies from the pump housing. If may be necessary to reduce the amount of deterExcessive foaming dur- Probably too much detergent gent used. detergent manufacturer's recommendations. The screw Connection on the Tighten the inlet hose screw inlet hose is leaking. The drain pump cover is not correctly close. Check the drain hose and replace it if necessary. Stop the programme, remove the washing caught in the door. Close the emergency emptying hose (see section , , Carry out emergency emptying"). Call your local Service Force Centre if the emergency emptying hose is leaking. The emergency emptying hose is not correctly closed or is leaking. 33 Operating Instructions Problem Possible cause Remedy Close the water tap, remove the mains plug and inform your local Service Force Centre. [. . . ] · This guarantee relates to you and cannot be transferred to another user. · Your new home is within the European Community (EC) or European Free Trade Area. · The product is installed and used in accordance with our instructions and is only used domestically, i. e. · The product is installed taking into account regulations in your new country. [. . . ]