User manual AEG-ELECTROLUX LAV920

[. . . ] Important information concerning your safety and proper functioning of the appliance is highlighted with the warning triangle or the signal words (Warning!, Caution!, Attention!). This symbol guides you step by step when operating the appliance. . . . 1 3 2 Next to this symbol you receive additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the machine are marked with the clover. [. . . ] Set the detergent drawer into the guide tracks and push in. 28 Operating instructions Washing Drum The washing drum is made of rust-free stainless steel. Rusty objects in the washing drum may lead to rust deposits on the drum. Do not clean the stainless steel drum with acid containing decalcifying agents, abrasives containing chlorine or iron, or steel wool. Appropriate cleansers are available from our customer service department. Remove rust deposits at the drum with a stainless steel cleanser. 0 Fill-in door 0 Check on a regular basis to see if deposits or foreign objects are present in or at the rubber sleeve behind the door, and remove. 29 Operating instructions What to do when. . . 3 The whistling noise caused by the running washing machine, which is somewhat different than that generated by earlier machines, is a result of the modern drive system. The rattling start-up noise especially at initial start-up is caused by the circulation pump and is related to the design of the machine Trouble Shooting In the event of a malfunction, try to eliminate the problem yourself with the help of the instructions listed here. If you request customer service assistance for one of the malfunctions listed here, or for an operator error, a charge will be billed for the customer service technician's visit, even during the guarantee period. If error code (1, (2 or Cd appears at the multi-display, you may be able to eliminate the error yourself (see the following table of malfunctions). After the error has been eliminated, press the O/s button (START/ PAUSE). If the error code is again displayed, contact customer service. Please contact customer service for all other error displays and inform them of the error code. Malfunction Possible Cause Remedy Mains plug is not plugged in. Fault code (2 appears. The fill-in door cannot be opened when the appliance is switched on. The door is locked for safety Wait until K/W is illumireasons (display K/W is not nated in green. Program protection is deactivated (see "Program Protection"). Clean sieve. The sieve in the coupling of Remnants of detergent the inlet hose at the tap is are building up in the clogged. The sieve in the coupling of the inlet hose at the appliance is clogged. No illumination when pressing an additional program. Clean sieve. The cause is probably a No negative impact on the detergent with a high silicate rinsing results, possibly use content. The additional program selected cannot be combined Make another choice. Press any button. Only L (END) is illumi- The washing machine is in nated. standby mode. 32 Operating instructions Malfunction Only X is illuminated. A number between 1 and 19 appears at the multi-display. Possible Cause Start delay timer is running, the washing machine is in stand-by mode. Program protection is switched on; the program selector has been moved during the washing cycle. [. . . ] Terlaton Street 42/44 1011 Riga Tel. : 371 2 297821 Fax: 371 2 821286 Lthuania Electrolux Lthuania Verkui 29 2600 Vilnus Tel. : 372 272 3326 Fax: 372 272 3366 51 Guarantee/Customer Service Israel Evis Ltd. Box 70 39 Tel-Aviv 67013 Tel. : 3257311 Malaysia Arzbergh Engineering No. 49A/B, Jalan Petaling Utama 7 4600 Petaling Jaya Tel. : 3 795 1084 Fax: 3 795 1082 Saudi Arabia Alia Trading Corporation P. O. Box 4101 King Abdul Aziz Street Riyadh Tel. : 4645977 Al Nahas Est. [. . . ]