User manual AEG-ELECTROLUX LAVAMAT 2200 I D

[. . . ] 0 This symbol guides you step by step when operating the appliance. This symbol gives additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the machine are marked with the clover symbol. If you require assistance or advice on your appliance, please contact our Customer Care Department by letter or telephone: AEG Domestic Appliances Limited 55-77 High Street Slough Berkshire SL 1 1DZ Tel: 08705 350350 3 2 Printed on environmentally friendly paper . . . [. . . ] 0 Press the START button to resume the drying process. End of the drying process The cooling phase starts shortly before the end of the drying process: The heater is switched-off during this phase. After the cooling phase you can remove the laundry from the dryer. The crease guard phase follows automatically after the drying process. This keeps your laundry loose and crease-free. If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is sounded intermittently during this phase. Removing the laundry 0 Open the door and remove the laundry. Switch-off the dryer 0 Turn the program selector to the OFF position. 17 Drying Empty the water reservoir 1 Caution!The condensed water is not suitable for drinking or for use with foodstuffs. The water reservoir should be emptied after every drying programme. This avoids interruption of a programme when the water reservoir is full. 0 Grasp the handle flap of the water reservoir and pull-out completely. 0 Push the cover of the water reservoir to the side and pour-out the condensed water. 0 Re-insert the water reservoir into the control panel. Information on illumination of the EMPTY WATER display: The EMPTY WATER display remains illuminated for a few seconds more after the condensation container is emptied. 0 If the drying cycle has not yet ended: Press the START button to continue the drying cycle. 3 The water reservoir has a capacity of approx. Therefore you should clean the entire filter area from time to time, or at least every three months. 0 Remove the fluff filter. 0 Hold the filter lid by the top and pull it forwards until it is released from both holders. 0 Remove the fluff from the entire filter area ­ preferably with a vacuum cleaner. 0 Press both pins of the filter lid into the holders on the door until they click in. 0 Press against the filter lid until it clicks into the lock. Cleaning the drum 1 Warning!Do not clean the stainless steel drum with abrasive deter- gents or steel wool!0 Wipe the inside of the drum and the drum fins with white vinager to avoid any residues/deposits effecting the sensors. This is particularly important if you regulary use fabric conditioning sheets or dry starched items in the dryer. Cleaning the panel and operating parts 1 Warning!Do not use household furniture polish or aggressive detergents. 0 Wipe over the panel and operating parts with a damp cloth. Only use warm water. 23 Cleaning and maintenance Cleaning the condenser 1 Important! [. . . ] The guarantee does not cover commercial use. The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage, neglect, faulty installation, unauthorised modification or attempted repair, commercial use or failure to observe requirements and recommendations set out in the instruction book. This guarantee does not cover such parts as light bulbs, removable glassware or plastic, dust bags or filters. [. . . ]