Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG-ELECTROLUX LAVAMAT BELLA 1003. We hope that this AEG-ELECTROLUX LAVAMAT BELLA 1003 user guide will be useful to you.
Lastmanuals help download the user guide AEG-ELECTROLUX LAVAMAT BELLA 1003.
Manual abstract: user guide AEG-ELECTROLUX LAVAMAT BELLA 1003
Detailed instructions for use are in the User's Guide.
[. . . ] Switching on the appliance/selecting a programme . Changing spin speed/selecting rinse hold . Interrupting a programme/adding washing . Washing cycle complete/removing the washing . [. . . ] If the fault is displayed again, please contact the Customer Care Department.
Problem Possible cause Mains plug not plugged in or fuse not working. START/PAUSE button was not pressed for long enough. Close door there should be an audible click. Press START/PAUSE button for longer.
Child safety device engaged. Unscrew hose, take out filter and clean it. Check the water tap and have it repaired if necessary.
END display flashes 1x. (Problems with water inflow)
Filter in the screw connection of the inlet hose is blocked. Water tap is blocked with limescale or faulty.
19
Problem
Possible cause Transit packaging has not been removed.
Remedy Remove transit packaging.
Washing machine vibrates when operating or is noisy.
Adjust feet according to the Screw feet not correctly adInstallation and Connection justed. There is very little washing in the drum (e. g. , just one bath robe). This does not affect how the machine operates.
Screw connection on the inTighten inlet hose. Water is leaking out un- Drain pump cover is not derneath the washing closed properly. After the last rinse foam can still be seen. · Modern detergents may create foam even in the last rinse cycle. The washing is however sufficiently rinsed. There are white residues on the washing. · This is due to the insoluble ingredients in modern detergents. They are not caused by insufficient rinsing. If possible turn the washing inside out before washing. Especially with dark colours it is advisable to use liquid detergents.
21
Carrying out an emergency drain
1
Warning!Before emergency draining, switch off the washing machine and remove the mains plug from the socket. The water that comes out of the emergency drain hose may be hot. Let the water cool before performing an emergency drain. [. . . ] (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Department stocks outlet hoses of different lengths. Draining water into a sink outlet Secure the outlet/sink outlet joint with a hose band clip (available from your dealer).
1
Draining water into a wash basin/bath Important! The end of the drain hose must not be in the water that has been pumped out. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX LAVAMAT BELLA 1003
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX LAVAMAT BELLA 1003 will begin.
