User manual AEG-ELECTROLUX LAVATHERM 3400 W

[. . . ] It is imperative that this information is observed. 0 1. This symbol guides you step by step through the operation of the appli- ance. . . . 3 2 Next to this symbol you will find additional information and practical tips on using the appliance. Tips and information on economical and environmentally responsible use of the unit are identified with the clover leaf. [. . . ] · With all other displayed faults (C plus number or letter): switch appliance off and on again. Reset the wash programme and press the START/PAUSE button. If the fault code is displayed again, please contact the Customer Service department quoting the fault code. Problem Possible Cause The mains plug is not plugged in. The fuse of the building's wiring is not in order. The filling door is not correctly closed. Button START/PAUSE not pressed for long enough. Close the filling door; The lock must engage audibly. Press the button START/ PAUSE until the program starts. Cancel the child safety feaThe filling door cannot The child safety feature is set ture (see Section "Child be closed. Error code Cd is shown in the multi-display. The filling door is not The indicators correctly closed. PRE WASH, RINSE and RINSE+ flash. Close the filling door correctly. In the case of easy-care textiles, select the program EASY IRON. Washing heavily creased. Too mush washing probably put in. The washing has not been spun as dry as usual. Always load the drum The washing was not able to as ful as possible with a combe distributed evenly in the bination of large and small drum prior to spinning. items. 34 Operating Instructions Problem Possible Cause Drainage hose bent. Remedy Remove the bend. Contact your customer servMaximum pumping height ice. For pumping heights (discharge height 1m from over lm he can offer you a Washing is not well the unit's standing surface) is conversion kit as a special spun. Error code (2 is shown Switch off the unit and pull in the multi-display. If a siphon is connected: Siphon blocked. Wait until the DOOR indicator lights up green. Should it nevertheless be necessary to open the main The filling door is locked be- door: cause of a high water level or Turn the programme knob to a high temperature. The OFF; turn the programme DOOR indicator lights red. The main door can be opened afThe main door cannot ter the water has been be opened while the pumped out. If water can be seen through the window in the door, first carry out emergency emptying (see section "Carrying out Emergency Emptying Operation"). [. . . ] Box 1 15 29 Jeddah Tel. : 6606852 Slovenia Electrolux Slovenia D. O. O. 132 1000 Ljubljana Tel. : 61 1234 137 Fax: 61 1234 238 Japan Electrolux Japan Ltd. Domestic Appliances Department Maruzen Showa Warehouse Building Tookai 4-5-12, Ota-ku 143-006 Tokyo Tel. : 0120-13-7117 Fax: 03-3790-5257 Thailand OLYMPIA Thai Ltd. 44 Ratchadapisek Road 10320 Bangkok Tel. : 2 513 6111 Fax: 2 513 2574 Hungary Electrolux Lehel KFT (AEG Div) Erzsébet Királyné útja 87. [. . . ]