User manual AEG-ELECTROLUX LAVB3050

[. . . ] LAVAMAT BELLA 3050 update The Environmentally-Friendly Washing Machine User Information Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). [. . . ] Filling Quantity (dry weight) 5kg Program Selector STARCHING (STÄRKEN, AMIDON. ) Cottons/Linen Separate Rinse Type of Washing Cottons/Linen Easy-Cares Delicates Woollens/Handwash Max. Filling Quantity (dry weight) 5kg 2. 5kg 2. 5kg 2kg GENTLE RINSE (FEINSPÜLEN, RINC. DELICAT) Program Selector Separate Spin Type of Washing Max. Filling Quantity (dry weight) 5kg 2. 5kg 2. 5kg 2kg Program Selector SPIN (SCHLEUDERN, ESSORAGE) SHORT SPIN (SCHONSCHLEUDERN, ESSOR. DELICAT) Cottons/Linen Easy-Cares Delicates Woollens/Handwash 30 Instructions for use Cleaning and Care Control Panel Attention!For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. Wipe off control panels with a damp cloth. Use warm water to do this. 0 Washing Detergent Drawer The washing detergent drawer should be cleaned from time to time. Pull out the washing detergent drawer as far as it will go. Remove the washing detergent drawer with a firm pull. Remove the softener insert from the middle compartment. Clean the softener insert under running water. 5. Clean the compartments from the rear with warm water. Push on the softener insert as far as it will go so that it is secure. 31 Instructions for use 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum The washing drum is made of high-quality stainless steel. Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust. Do not clean the stainless steel drum with acidic antiliming agents, scouring agents containing chlorine or iron or steel wool. Our Customer Service Department has suitable agents available. Remove any rust deposits on the drum using a stainless steel cleaning agent. 0 Filling Door 0 Check regularly whether there are deposits or foreign bodies in the rubber sleeve behind the filling door and, if so, remove them. 32 Instructions for use What to do if . . . Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. · If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below). [. . . ] für die ganze Schweiz ServicePhon 0848 848 348 Fax 062/889 95 85 Ersatzteildienst Ersatzteilverkauf ganze Schweiz Telefon 0848 848 028 Fax 062/889 94 90 Regionalbüro Westschweiz: 1028 Préverenges Le Trési 6, Verkauf Tel. 021/803 24 15 Fax 021/803 25 24 Regionalbüro Tessin: 6616 Losone Centro Montana Verkauf Tel. 091/791 14 12 Fax 091/792 18 03 Zudem besteht ein dichtes Netz von AEG-Servicestellen. Nous disposons en outre d'un réseau de points de Service après-vente AEG. [. . . ]