User manual AEG-ELECTROLUX LAVP5050

[. . . ] LAVAMAT Princess 5050 Washing Machine User Information Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). [. . . ] Select any additional programme functions: The indicator light for the selected additional programme function comes on. ­ To change the selection, press another button. ­ To de-select, press the button again. 20 Instructions for use Changing Spin Speed/Selecting RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) 0 To change the Spin Speed for the final rinse or select RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE): Keep pressing the Spin Speed/RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) button until the light for the desired speed (or RINSE HOLD/SPÜLSTOPP, ARRET CUVE PLEINE) comes on. If RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) is selected, the washing is left to soak in the last rinse water, without spinning. If the Spin Speed is not changed, the final spin is set automatically according to the wash programme: ­ COTTONS/LINEN 1000 rev/min. (KOCH-/BUNTWÄSCHE, BLANC COULEURS) ­ ENERGY SAVING 1000 rev/min. (ENERGIE SPAREN, ECONOMIQUE) 1000 rev/min. ­ EASY-CARES/EASY IRON (PFLEGELEICHT/LEICHTBÜGELN, TEXTILES MELANGES/FACILE A REPASSER) ­ DELICATES (FEINWÄSCHE, DELICAT) 1000 rev/min. ­ WOOL/SILK (WOLLE/SEIDE, LAINE/SOIE) 1000 rev/min. P (Handwash) The speed of intermediate spins depends on the selected programme and is not adjustable. 3 Starting the Wash Programme 0 1. Starting the wash programme: Press the START/ PAUSE (START/PAUSE, MARCHE/PAUSE) button. The wash programme starts. 3 If the END (ENDE, FIN) light flashes 4 times when the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button is pressed, the door is not closed properly. If this happens, push the door firmly closed and press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again. 21 Instructions for use Wash Programme Progress Programme Progress Display Before the programme starts, the steps to be carried out are indicated on the Programme Progress Display. During the wash programme, this indicates the current stage of the programme. Changing the Wash Programme Changing or cancelling the programme 1. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button. Turn the programme knob to OFF (AUS, ARRET). Set another wash programme, if required. Otherwise, turn the programme knob to DRAIN (PUMPEN, VIDANGE) or SPIN (SCHLEUDERN, ESSORAGE) and press the START/PAUSE (START/PAUSE, MARCHE/ PAUSE) button. (The water is drained or the washing is spun. ) 3 The wash programme can be interrupted at any time by pressing the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button. It is then restarted by pressing the button again. A wash programme can only be changed after the programme knob has been turned to OFF (AUS, ARRET). Selecting an Additional Programme Function The additional programme functions QUICK WASH (KURZ, COURT) or STAIN (FLECKEN, TACHES) can still be selected after the programme has started. [. . . ] Place a cloth on the floor in front of the cover of the drain pump. Unscrew the drain pump cover in an anti-clockwise motion and pull it out. 1 4. Remove any foreign objects and fabric lint from the pump housing and from the pump wheel. 35 Instructions for use 5. Check that you are able to turn the pump wheel at the very rear of the pump housing. [. . . ]