User manual AEG-ELECTROLUX LAVPRINCESS803GB

[. . . ] Important information concerning your safety and proper functioning of the appliance is highlighted with the warning triangle or the signal words (Warning!, Caution!, Attention!). This symbol guides you step by step when operating the appliance. . . . 1 3 2 Next to this symbol you receive additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the machine are marked with the clover. [. . . ] Set the program selector to the desired washing program. 3 2. Set the temperature selector to the desired temperature. In the case of easy-care washing: 3. Press the } EASY-CARES button. 3 The } (EASY-CARES) button can only be combined with the programs in the t/ (COTTONS/LINEN, EASY-CARES WITH BUTTON) program groups; in all other cases this button has no effect. Starting the Washing Program 0 1. Check whether the water tap is opened. 2. Switch on the washing machine: Press the M (ON/OFF) button. The indicator illuminates, the washing program starts. 18 Operating instructions Changing the Spin Speed or Selecting Rinse Hold 0 If desired, reduce the spin speed for the final spin or select rinse hold: Press the spin speedbutton or Press the o (RINSE HOLD) button. If o (RINSE HOLD) is selected, the washing is left in the last rinse water, it is not spun. If you do not reduce the spin speed, the final spin will be automatically adjusted to suit the washing program: t (COTTONS/LINEN) 1200 revolutions per minute } (EASY-CARES WITH BUTTON) 1000 revolutions per minute (DELICATES) 1000 revolutions per minute s (WOOLLENS) 1000 revolutions per minute The speed for the intermediate spin is dependent on the program selected and cannot be changed. 3 During the Washing Program Program progress indicator The program selector serves as a program progress indicator by rotating in a clockwise direction to the end of the program. It is normal for the rotation speed of the program selector to vary during the program. Changing settings: During the washing program you can: Change the spin speed Select o (RINSE HOLD) Change the temperature setting Other settings cannot be altered. Turn the program selector clockwise to v (PUMP OUT), position 6 (SPIN), or position 8 or 11 (SHORT SPIN). Clean compartments with warm water from the rear. For best results use a bottle brush. 6. Push the siphon cap all the way on so that it is securely seated. Clean the entire compartment area of the washing machine with a brush. Set the detergent drawer into the guide tracks and push in. 23 Operating instructions Washing drum The washing drum is made of rust-free stainless steel. Rusty objects in the washing drum may lead to rust deposits on the drum. Do not clean the stainless steel drum with acid containing decalcifying agents, abrasives containing chlorine or iron, or steel wool. Appropriate cleansers are available from our customer service department. Remove rust deposits at the drum with a stainless steel cleanser. 0 Fill-in door 0 Check on a regular basis to see if deposits or foreign objects are present in or at the rubber sleeve behind the door, and remove. 24 Operating instructions What to do when. . . 3 The somewhat different, in comparison to older washing machines, whistling noise during spinning is due to the modern drive system. A rattling sound on startup in particular when using for the first time is caused by the circulation pump and is due to the design. Trouble Shooting In the case of a malfunction try to solve the problem with the aid of the notes given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer's visit is not free of charge, even during the period of guarantee. Malfunction Possible Cause Remedy Washing machine does Mains plug is not plugged in. [. . . ] For washing machines without Aqua-Control, tubing sets are available in lengths of 2. 2m, 3. 5m and 5m. For washing machines with Aqua-Control, tubing sets are available in lengths of 2. 0m, 2. 9m and 3. 9m. Under no circumstances may tubing be pieced together for the purpose of lengthening!Sealing rings are either inserted in plastic nuts of the tubing screw connection or contained in an accompanying packet. [. . . ]