User manual AEG-ELECTROLUX LAVR2850

[. . . ] LAVAMAT REGINA 2850 update The Environmentally-Friendly Washing Machine User Information Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). [. . . ] Remove any rust deposits on the drum using a stainless steel cleaning agent. 0 Filling Door 0 Check regularly whether there are deposits or foreign bodies in the rubber sleeve behind the filling door and, if so, remove them. 32 Instructions for use Cleaning the drain pump Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump. Therefore the drain pump should be cleaned at least once a year. Switch off the washing machine and pull out the mains plug before cleaning the drain pump!First carry out an emergency emptying (see section "Carry Out Emergency Emptying"). Place a towel on the floor in front of the cover of the drain pump. Unscrew the drain pump cover anticlockwise and pull it out. 1 4. Remove any foregin bodies from the pump housing. 5. Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise. 6. Close the emergency emptying hose and place it in the holder. Close the flap. 33 Instructions for use What to do if . . . Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. · It the fault code C1 or C2 appears in the multi-display, you may be able to remedy the fault yourself (see the fault table below). After remedying the fault, press the button START/PAUSE. If the fault code is displayed again, please inform the Customer Service. · In the case of all other displayed faults (C and number or letter), please inform the Customer Service and state the fault code. Problem Possible Cause Remedy Mains plug is not plugged in. START/PAUSE button not pressed for long enough. Press START/PAUSE button until the programme starts. Cancel child safety system (see section on "Child Safety System"). Turn on the water tap. Turn off the water tap. UnFilter in screw connection of screw the hose from the tap, the inlet hose is blocked. remove the filter and clean under running water. [. . . ] für die ganze Schweiz ServicePhon 0848 848 348 Fax 062/889 95 85 Ersatzteildienst Ersatzteilverkauf ganze Schweiz Telefon 0848 848 028 Fax 062/889 94 90 Regionalbüro Westschweiz: 1028 Préverenges Le Trési 6, Verkauf Tel. 021/803 24 15 Fax 021/803 25 24 Regionalbüro Tessin: 6616 Losone Centro Montana Verkauf Tel. 091/791 14 12 Fax 091/792 18 03 Zudem besteht ein dichtes Netz von AEG-Servicestellen. Nous disposons en outre d'un réseau de points de Service après-vente AEG. [. . . ]