User manual AEG-ELECTROLUX LAVW1020-W

[. . . ] LAVAMAT W 1020 Washing machine Instruction book Dear customer, Please read these user instructions carefully. Above all, observe the "Safety" section in the first pages. Keep these user instructions in a safe place for future reference. Please pass them along to future owners of the appliance. [. . . ] 3) Woollen garments with the woolmark may only be washed in the machine if they are also marked with "does not produce fluff", "non-fluffing" or "washing machine-safe". 21 Operating instructions Washing with a Pre Wash Type of Washing Cottons/Linen Easy-Cares Max. Load (weight dry) 5kg PRE WASH 2. 5kg 30 to 60 EASY-CARES Program Selector Temperature Selector 30 to 95 Additional Button Separate Rinsing Type of Washing Cottons/Linen Easy-Cares Delicates Woollens Max. Load (weight dry) 5kg RINSE 2. 5kg 2. 5kg GENTLE RINSE 2kg EASY-CARES Program Selector Additional Button Separate Gentle Rinsing/Starching/Conditioning Type of Washing Cottons/Linen Easy-Cares Delicates Woollens Max. Load (weight dry) 5kg CONDITIONER 2. 5kg 2. 5kg GENTLE RINSE 2kg EASY-CARES Program Selector Additional Button Separate Spinning Type of Washing Cottons/Linen Easy-Cares Delicates Woollens Max. Load (weight dry) 5kg SPIN 2. 5kg 2. 5kg 2kg SHORT SPIN SHORT SPIN EASY-CARES Program Selector Additional Button 22 Operating instructions Cleaning and Caring Control panel Attention!Do not use furniture care products or aggressive cleansers for cleaning control panels and control elements. Use warm water. 0 Detergent drawer The detergent drawer should be cleaned from time to time. Pull the detergent drawer out as far as it will go. Remove the detergent drawer by pulling sharply. Clean the siphon cap under running water. 5. Clean compartments with warm water from the rear. For best results use a bottle brush. 6. Push the siphon cap all the way on so that it is securely seated. Clean the entire compartment area of the washing machine with a brush. Set the detergent drawer into the guide tracks and push in. 23 Operating instructions Washing drum The washing drum is made of rust-free stainless steel. Rusty objects in the washing drum may lead to rust deposits on the drum. Do not clean the stainless steel drum with acid containing decalcifying agents, abrasives containing chlorine or iron, or steel wool. Appropriate cleansers are available from our customer service department. Remove rust deposits at the drum with a stainless steel cleanser. 0 Fill-in door 0 Check on a regular basis to see if deposits or foreign objects are present in or at the rubber sleeve behind the door, and remove. 24 Operating instructions What to do when. . . 3 The somewhat different, in comparison to older washing machines, whistling noise during spinning is due to the modern drive system. A rattling sound on startup ­ in particular when using for the first time ­ is caused by the circulation pump and is due to the design. Trouble Shooting In the case of a malfunction try to solve the problem with the aid of the notes given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer's visit is not free of charge, even during the period of guarantee. Malfunction Possible Cause Remedy Washing machine does Mains plug is not plugged in. Sieve in the threaded fitting on the water inlet hose is blocked. [. . . ] AEG shall not be responsible for damage of any kind resulting from electricity fluctuations, faults in the building wiring, faulty installations, improper use of controls or failure to use the appliance in accordance with the operating instructions and/or general misure and/or abuse. Any attempt by an unauthorised person to repair or tamper with the equipment shall render this guarantee null and void. This guarantee does not apply to light bulbs, loose glass, glass oven doors and enamelled surfaces or to dust bags, filters and other parts subject to wear and tear. AEG shall not be responsible in terms of this guarantee for the replacement or repair of any part of the equipment which may have been damaged in transit. [. . . ]