User manual AEG-ELECTROLUX LB3470WT

[. . . ] Com CONTENTS 4 6 7 8 12 15 17 17 20 21 22 24 26 31 34 SAFETY INFORMATION TECHNICAL INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES CONSUMPTION VALUES BEFORE FIRST USE USING THE APPLIANCE - WASHING ONLY AT THE END OF THE PROGRAMME USING THE APPLIANCE - DRYING ONLY USING THE APPLIANCE - WASHING & DRYING HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] The display shows the new time value every minute. If you set the time value of only 10 minutes, the appliance performs only a cooling phase. At the end of the programme • The appliance stops automatically. In the display • The indicator of the Start/Pause button 4 goes off. The last minutes of the drying cycle the appliance performs the anti-crease and the cooling phases. • Press button 1 to deactivate the appliance. After some minutes from the end of the programme, the energy saving function automatically deactivates the appliance. € When the door locked symbol goes off, you can open the door. € Remove the laundry from the appliance. With the automatic drying: • press the button 8 again and again until a black line appears under one of the dryness level symbol: Extra dry symbol Cupboard dry symbol Iron dry symbol • The display shows a time value, calculated on a default load size. If the amount of your laundry is more or less than the default size, the appliance adjusts automatically the time value during the cycle. € Press the button 4 to start the programme. You cannot set all levels for all type of laundry. With the timed drying: • Press the button 7 again and again to set the drying time value (see the «Programme for timed drying» table). Do not put a plastic device/ball for the detergent into the drum. € Turn the programme dial to the washing programme. Do not set a spin speed lower than the automatic speed of the set programme. € Press the button 7 until the black line appears under one of the dryness level symbol. The last minutes of the drying cycle the appliance performs the anti-crease and the cooling phases. € When the programme is completed, the appliance stops automatically. € When the symbol goes off, you can open the door. € Remove the laundry from the appliance. [. . . ] € Make sure that the appliance does not touch the wall or other units • Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. X4 ENGLISH 37 • The appliance must be level and stable. Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. [. . . ]