User manual AEG-ELECTROLUX LTH-57760

[. . . ] Useful tips and hints Environmental information 2 Contents Operating Instructions. Switching machine on / switching light on . Opening loading door / loading laundry . Putting in extra items or taking items out before end of programme . [. . . ] In order to continue the programme, the condensate tank must first be emptied. 1 Warning!The condensate is not suitable for drinking or for preparing foodstuffs. Take out drawer containing condensed water container completely (1) and pull up the condensed water container's drainage pipe as far as it will go (2). 3 3 2. Pour condensed water out into a basin or similar receptacle. Slide outlet connections in and refit condensate tank. If the programme has been interrupted as a result of the condensate tank being full: Press the START/PAUSE (START/ PAUZE) button to continue the drying cycle. The condensate tank has a volume of approx. This is sufficient for around 6kg of laundry which has previously been spun at 800 revolutions/minute. The condensate can be used as distilled water, e. g. However first filter the condensate (e. g. with a coffee filter) to remove any residue and small pieces of fluff. 19 Cleaning the fluff filter If the indicator CLEAN BASE FILTER (REINIG SOKKELFILTER) lights up, the fluff filter and the filter mat in the base of the appliance must be cleaned. 21 Cleaning the drum 1 3 Caution!Do not use abrasives or steel wool to clean the drum. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs. Clean operating screen and housing 1 Caution!Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if . . . Troubleshooting by yourself If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the machine off and on again. Press the START/PAUSE (START/PAUZE) button If the error is still displayed, please inform your local Service Force Centre and quote the error code. Problem Possible cause Remedy Mains plug is not plugged in Plug in at mains socket. Check or fuse is not working cor- fuse in fuse box (domestic inrectly. Close loading door. Have you pressed the START/ Press the START/PAUSE (START/ PAUSE (START/PAUZE) butPAUZE) button again. [. . . ] The guarantee will not apply if damage caused to delicate parts, such as glass (vitreous ceramic), synthetic materials and rubber, is the result of inappropriate use. The guarantee cannot be called on for minor faults that do not affect the value or the overall reliability of the appliance. The statutory warranty does not apply when defects are caused by: · a chemical or electrochemical reaction caused by water, · abnormal environmental conditions in general, · unsuitable operating conditions, · contact with harsh substances. The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. [. . . ]