User manual AEG-ELECTROLUX LTH7061TK

[. . . ] LAVATHERM 7061 TK ELECTRONIC Condensation dryer User Information Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. 1 3 2 The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. Useful tips and hints Environmental information 2 Contents Instructions for use . [. . . ] Press the OPTION button repeatedly until ú SETUP flashes. The display changes to the Special Functions level. Programme memory position MEMORY 1 is offered first. Memory 1 Store program? aýaýa TÜR PORTE U/MIN T/MIN. OPTION OPTIONS OK OK 12. 45 aýaýaýaýBýaýaýaýa ZEIT TEMPS 3 3 To change to another memory position, press the OPTION button. The programme combination is now stored to programme knob position MEMORY 1 and in the future can be selected directly using the programme knob. The Memory can be overwritten at any time with a new programme combination (see "Changing the Memory"), but cannot be deleted. Put together the new programme combination as required (for an example, see "Setting the Memory", steps 1 and 2). Press the OPTION button repeatedly until the ú SETUP symbol flashes. Using the OPTION button select the memory position to be changed, e. Store the new programme combination using the OK button. 19 Sound The volume of the acoustic audible signal can be selected. Turn the programme knob to any programme and press the OPTION button repeatedly, until the ú SETUP symbol flashes. Press the OPTION button repeatedly, until SOUND is shown in the display. Press the OPTION button re12. 45 Sound peatedly until the desired NORMAL volume (NORMAL, LOW, NO aýaýaýaýBýaýaýaýa SOUND) is shown in the dis- aýaýa TÜR U/MIN OPTION OK ZEIT play. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION button repeatedly until the initial display is shown. Water hardness The dryer's degree of dryness detection can be set to the hardness of the washing water. Turn the programme knob to any programme and press the OPTION button repeatedly, until the ú SETUP symbol flashes. Press the OPTION button repeatedly, until WATER HARDNESS is shown in the display. Press the OPTION button re12. 45 Water Hardness peatedly until the desired NORMAL water hardness (NORMAL, aýaýaýaýBýaýaýaýa SOFT, HARD) is shown in the aýaýa TÜR U/MIN OPTION OK ZEIT display. Press the OK button to confirm the setting. The icon changes to the next special function. Press the OPTION button repeatedly until the exit icon is displayed. [. . . ] Once the door stop has been replaced, check the function of the DOOR (TÜR) button. Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted. 32 Special accessories The following special accessories are available from your Service Force Centre or your specialist dealer: Intermediate installation kits for stacked washer and dryer These intermediate installation kits can be used to arrange the dryer and an AEG-Electrolux washing machine (60cm wide, front loading) as a space-saving washer/dryer stack. The automatic washing machine is at the bottom and the dryer is at the top. Two versions can be supplied: ­ without stacker plate 916. 018 902 ­ with extractable stacker plate 916. 018 903 Installation kit for external condensed water drain Installation (125 122 510) kit for direct draining of condensed water into a basin, spigot, drain, etc. [. . . ]