User manual AEG-ELECTROLUX LUX WIN100

[. . . ] Complete, Easy To Read FEATURES 5 2 1 3 4 INSTALLATION AND OPERATING INSTRUCTIONS WIN100 SERIES SMART TEMP ELECTRONIC THERMOSTAT LUX PRODUCTS CORPORATION Mt. Laurel, New Jersey 08054, USA 43382-05 ® Please read all instructions carefully before beginning installation. WARNING: FOR USE ONLY WITH AIR CONDITIONERS AND SPACE HEATERS THAT AUTOMATICALLY RESTART COOLING OR HEATING OPERATION AFTER POWER RECONNECTION I M P O R TA N T ! 1. LUX SPEED DIAL® SENSOR Thank you for your confidence in our product. [. . . ] Likewise, a cooling system should provide cool air after a short time. Usually sound can be heard while they are running. The rush of moving air should be heard within a short time after either has been started. Your installation is now complete. 3. Use the UP key to advance to the current day. Pressing NEXT again will toggle from Set Time to Set Day, or vice versa. Return the dial to its RUN position. TEMPERATURE CONTROL MODES When a unit has first been powered up with the dial in the RUN position, your thermostat will begin to control your heating and/or air conditioning system according to it's default ENERGY STAR® approved program. There is a 2-position slide switch to change temperature control modes. Slide the switch to the mode you would like to use. HEAT Use HEAT mode to warm your home with a Space Heater. In HEAT mode, HEAT is displayed right of the set temperature. COOL Use COOL mode to control your Window Air Conditioner, cooling your home. In COOL mode, COOL is displayed right of the set temperature. Slide the SLIDE switch to OFF when no heating or cooling is desired. Heating and cooling will be disabled, even though the set temperature, room temperature, and time will still be in the display. PROGRAMMING EDITING HEAT OR COOL PROGRAMS The WIN100 provides two separate programs, one for heating and the other for cooling. Each program has separate settings for weekdays and weekends. Every day a program cycles through four independent periods. You can use the default programs or alter them to suit your schedule. ON/OFF SWITCH DEFAULT TEMPERATURE PROGRAM As supplied from the factory, the following ENERGY STAR® approved program will be used for temperature control in RUN MODE. This program and all other software settings may be restored to their default values via a SOFTWARE RESET. PERIOD HEAT MODE COOL MODE Morning 6:00 AM 70°F (21°C) 6:00 AM 78°F (26°C) 8:00 AM 62°F (17°C) 8:00 AM 85°F (30°C) Day Evening 6:00 PM 70°F (21°C) 6:00 PM 78°F (26°C) 10:00 PM 62°F (17°C) 10:00 PM 82°F (28°C) Night DEFAULT PROGRAM As supplied from the factory, your thermostat will use its default ENERGY STAR® approved program for temperature control. This program and all other settings may be restored to their default values via a SOFTWARE RESET. Please refer to DEFAULT TEMPERATURE PROGRAM for program times and temperatures. HOLD Hold is the simplest method to maintain fixed set temperatures. Press HOLD once to enter the temperature HOLD while in RUN or OVERRIDE. HOLD will be displayed on the bottom of the display. [. . . ] Our number is (856) 234-8803 or you can email us directly at: techsupport@luxproducts. com WARRANTY Limited Warranty: If this unit fails because of defects in materials or workmanship within one year of date of original purchase, LUX will, at its option, repair or replace it. This warranty does not cover damage by accident, misuse, or failure to follow installation instructions. Implied warranties are limited in duration to one year from date of original purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. [. . . ]