User manual AEG-ELECTROLUX M8000

[. . . ] Nevertheless, as a manufacturer we consider it our obligation to make you aware of the following safety information. please read these instructions carefully. Pay special attention to the safety instructions on the first pages. Keep the instructions in a safe place for future reference. [. . . ] 0 Plug the power cord into a power outlet. 1/B) and put all the required ingredients in the blender tank. Do not exceed the maximum capacity of 1. Safety System The safety system prevents the blender from being operated if the blender tank is not correctly seated. 3 1 You should nevertheless still keep children away from the appiance. Ice crushing The blender can be used for crushing ice. 0 Simply add ice to the blender then press the PULSE button and hold for 12 seconds and release. Continue this process and in seconds your ice is crushed. 3 You can add other ingredients through the filler hole while the blender is running. You can use the filler cup in the lid to do this (Fig. Close the filler hole immediately after, to avoid splashing. 1 Do not start the blender without the lid (Fig. Although the lid fits firmly to the blender tank, we advise when blending liquid ingredients, to place your hand on the lid as you initially start blending. As the powerful motor could cause the liquid to surge up causing leakage. Once you have started blending you can remove your hand. 0 Start the blender by turning the Speed Selector (Fig. 1/G) to the right, or by pressing the PULSE Button (Fig. We recommend starting with blender Speed 1, then progressing to Speed 2 or 3. The PULSE Button runs the blender at full speed. The „Blending guide“ on page 15 shows the functions that can be performed and the suggested speeds to use. 0 After you have completed blending, turn the Speed Selector off to position . 0 After mixing, first remove the blender tank, before taking off the lid. [. . . ] 2 W 3 1 If necessary, the blade assembly can also be cleaned separately. Be careful when rinsing the blade assembly (The blades are sharp!When replacing the blade assembly, turn it clockwise using the filler cup (Fig. See paragraph „Assembling the Blender“ on page 12. [. . . ]