User manual AEG-ELECTROLUX MC DUO 230 E-D

[. . . ] Installation Environment concerns GREAT BRITAIN & IRELAND Guarantee/Customer Service The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice 4 Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your personal safety and the safety of your property · For the respect of the environment · For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage. Children and vulnerable people safety · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. [. . . ] 23 h 59 min). Duration End Time You can use Duration and End Time at the same time, if you want to automatically activate and deactivate the appliance on a given time later. If you set the time for a clock function, the time starts to count down after 5 seconds. If you use the clock functions Duration and End Time , the appliance deactivates the heating elements after 90 % of the set time. The appliance uses the residual heat to continue the cooking process until the time ends (3-20 minutes). Press again and again until the display shows the necessary clock function and the related symbol. Press After 90 % of the set time, an acoustic signal sounds. Press a sensor field to stop the signals. With Duration and End Time the appliance deactivates automatically. Automatic programmes 17 With Duration and End Time you must set the heating function and the temperature first. When you use Core Temperature Sensor, Duration and End Time do not work. Heat + Hold You can activate or deactivate the function in the Basic Settings menu. The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates after the baking or roasting procedure ends. You have to set: · The oven temperature · The core temperature Use only original parts. Put the tip of the core temperature sensor into the centre of the meat. Put the plug of the core temperature sensor into the socket on the right-upper side of the cavity front. Using the accessories 19 4. 5. The display shows core temperature sensor. or in less than 5 seconds to set the core temperature. Press Set the oven function and, if necessary, the oven temperature. The appliance calculates an approximate end time. An end time is different for the different quantities of the food, the set oven temperatures (minimum 120°C) and the operating modes. The appliance calculates the end time in approximately 30 minutes. The core temperature sensor must stay in the meat and in the socket during the cooking process. When the meat reaches set core temperature, an acoustic signal sounds. The appliance switches off automatically. [. . . ] For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging material The packaging material is environmentally-friendly and recyclable. Plastic parts are marked with international abbreviations such as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility. 30 GB IE GREAT BRITAIN & IRELAND - Guarantee/Customer Service GREAT BRITAIN & IRELAND - GUARANTEE/CUSTOMER SERVICE Standard guarantee conditions: We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: · Appliance has been correctly installed and used only on the electricity supply stated on the rating plate. [. . . ]