User manual AEG-ELECTROLUX MICROMAT 112 Z W

[. . . ] and please pass it to any future owner of the appliance. We wish you much joy with your new appliance. SAFETY INFORMATION INSTALLATION DESCRIPTION OF THE APPLIANCE OPERATING THE APPLIANCE On and Off Automatic Switch Off The heat setting Automatic Heat Up Timer 38 39 42 43 43 43 43 44 44 Starting the STOP+GO Lock The child safety device HELPFUL HINTS AND TIPS CARE AND CLEANING WHAT TO DO IF. Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. [. . . ] Do not install the appliance adjacent to doors and below windows!If not, hot cookware can be hit off the hob when you open doors or windows. Make electrical mains terminal free of voltage. install correctly to give anti-shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single-phase or two-phase connection. ⷠReplace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. If you use a protection box (the additional accessory), the protective floor directly below the appliance is not necessary. Function starts and stops the hob locks/unlocks the control panel Shows the heat setting shows for which zone you set the time shows the time in minutes increase or decrease heat setting increase or decrease the time selects the cooking zone starts and stops the STOP+GO function The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Risk of burns from residual heat!When the time elapses, the sound operates and 00 flashes Touch to stop this function. The heat setting that you set before comes on. ⷠTouch does not stop the timer function. You can lock the control panel, but not . it prevents an accidental change of the heat setting. Helpful hints and tips To stop this function touch . The heat setting that you set before comes on. When you stop the appliance, you also stop this function. Starting the child safety device · start the hob with . Switching off the child safety device · start the hob with . Set the heat setting in less than 10 seconds. [. . . ] Use a special cleaning agent for glass ceramic or stainless steel. Clean the appliance with a moist cloth and some detergent. At the end rub the appliance dry with a clean cloth. Activate the appliance again and set the heat setting in 10 seconds. [. . . ]