User manual AEG-ELECTROLUX MTRS265WGW3

[. . . ] Return the product to your local recycling facility or contact your municipal office. VISIT OUR WEBSITE FOR: - Products - Brochures - User manuals - Trouble shooter - Service information www. aeg. com LEGEND Warning - Important Safety information. General information and tips Environmental information Subject to change without notice. ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. [. . . ] The display shows the symbol of the set function and the digit ( D ) shows the delayed time. LOADING THE LAUNDRY 1. The display (E) shows the maximum programme load for the programme (MAX ) and the weight of the laundry (KG). The text bar on the display tells to add the laundry. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. On the display the weight of the laundry updates by step of kg 0. 5. The weight is indicative and changes with the type of the laundry. If you put more laundry than the maximum load, the display tells that you put more than the maximum load. You can wash your laundry but the energy and water consumption increase. To have the best consumption and washing performance remove some items. The overload indication is available only for programmes with a maximum load lower than the appliance maximum load. 5. Close the door. If a delayed start is set, the appliance starts the countdown. 1. Change the function set. 3. Touch button 6 again. The washing programme continues. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. INTERRUPT A PROGRAMME 1. The washing programme continues. Touch button 6 . The door lock symbol in the display goes off and a message tells you that the door is unlocked. Close the appliance door and touch button 6 again. The programme or the delay start continues. If the temperature and the level of the water is too high, the door lock symbol stays on. If necessary, do the following procedure to open the door: 1. [. . . ] Refer to the illustration: A (FRONT) = Front of the appliance B (BACK) = Rear of the appliance B 10. ­ Remove the adhesive strip from x4 A the silent barriers. ­ Attach the four barriers to bottom of the appliance. ­ Make sure that the barriers are securely attached. [. . . ]