User manual AEG-ELECTROLUX NOVAMAT430

[. . . ] The "synthetics" programmes end with a rinse hold to avoid the creasing of the laundry in case it is not taken away from the drum just after the wash. To end these programmes, you can select a spinning (programme 7) or a draining (programme 14). To end the wool programme, we advise you to realize a draining programme. [. . . ] If the water is hard or if the laundry is very soiled or stained, increase the detergent quantity a little. For information regarding the degree of hardness in your area, enquire with your local authorities. Bleach You may use a bleach agent in all the washing programmes. However, make sure that the fabric withstands the treatment. Bleach is automatically washed down into the drum. Pour 1/4 to 1 glass of 12° chl bleach into compartment "c " before switching the machine on. Make sure that the level of the liquid never exceeds the "MAX" mark. Softener Compartment "d" allows automatic addition to the last rinse of a liquid softener. Follow the quantities recommended on the bottle. Make sure that the level of the liquid never exceeds the "MAX" mark. Removal of internal packing The parts protecting the inner components of the machine during transit are red. They must all be removed before using your machine for the first time. These parts and their securing means should be kept in case the machine has to be transported again. Unscrew and remove the 2 screws A end the 2 red washers B situated under the washing machine, then pull on the red plastic ring to take part C out of the machine (fig. After removing the 4 nuts D, the 4 washers (fig. 2), remove the 4 red plastic sleeves E : pull the ring, rotating it at the same time leftwards and rightwards (fig. If you do not manage to take the red socket off, use a wrench and turn it anticlockwise as shown on the picture (fig. Unscrew and remove the 4 threaded pins F. [. . . ] If an extension is required, remember that it might cause a malfunction in the drain pump, particularly if the extension has a length in excess of 1 meter or if the diameter of the extension is smaller than the diameter of the original drain hose. Water pressure : minimum 5 N/cm2 (0, 5 kg/cm2) maximum 80 N/cm2 (8 kg/cm2) Levelling and positioning To enable the appliance to be moved with ease, it is provided with two fixed wheels located at the rear of the base. Level the appliance very carefully by adjusting the levelling feet located at the front of the base. [. . . ]