User manual AEG-ELECTROLUX OEKOS1554-6IU

[. . . ] ÖKO-SANTO 1554-6 iU Base unit fridge that can be built-in Operating Instructions Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] 3. The wire coloured brown must be connected to the terminal marked "L" or coloured red. 4. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safety. 14 Description of the appliance View of the appliance Butter/cheese compartment Sliding shelf Bottle shelf Vegetable baskets Storage shelves Thermostat Prior to Initial Start­Up Please clean the appliance interior and all accessories prior to initial start-up (see section: "Cleaning and Care"). 15 Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with protective earth contact. When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature selector knob is located on the RH side of the refrigerator compartment. Turning clockwise in direction "1": Refrigerating unit on, the latter then operating automatically. Setting "1" means: Hightest temperature, warmest setting. Setting "6" (end-stop) means: Lowest temperature, coldest setting. AEG62 At a low ambient temperature of around 16°C, setting "1" should be selected. At ambient temperatures of around 25°C, select setting "2". If you require a lower temperature, select setting "3" or "4". on hot summer days) and a cold setting on the temperature regulator (position"5" to "6") can cause the compressor to run continuously. Reason: when the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance. The fridge will not be able to defrost since automatic defrosting of the fridge is only possible when the compressor is not running (see also "Defrosting" section). The result is the build up of a thick layer of frost on the fridge rear wall. If this happens, turn the temperature regulator back to a warmer setting (position "3" to "4"). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced. 16 Interior Accessories Storage shelves/wire trays Various glass or plastic storage shelves and wire trays are included with your appliance - different models have different combinations. You should always slide one of the full size glass storage shelves into the lowest set of guides, above the fruit and vegetable containers, and keep it in this position. The height of the storage shelves can be adjusted: To do this pull the storage shelf forward until it can be swivelled upwards or downwards and removed. Please do the same in reverse to insert the shelf at a different height. VARIO glass storage shelf Your appliance is equipped with two half size glass storage shelves. Storing tall items: Slide the front half of the Vario storage shelf in another level to the rear. [. . . ] At the same time shape the warmed door seal by hand such that it sits correctly. Move the appliance slightly. The food is too warm. Interior lighting does not work. Heavy build up of frost, possibly also on the door seal. Door seal is not air tight (possibly after changing over the hinges). Appliance is not level. The appliance is touching the wall or other objects. a pipe, If necessary, carefully bend on the rear of the appliance the component out of the is touching another part of way. [. . . ]