User manual AEG-ELECTROLUX PBE11

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] Make sure that the salt container and the rinse aid dispenser are full. Start the shortest programme with a rinsing phase, without detergent and without dishes. Adjust the water softener to the water hardness in your area. 5. 2 TimeSaver This option increases the pressure and the temperature of the water. The washing and drying phases are shorter. The total programme duration decreases by approximately 50%. The washing results are the same as with the normal programme duration. The related indicator and the programme bar come on. In the display you can see the update of the programme duration. 10 www. electrolux. com 6. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. Press and hold, at the same time, Delay and EnergySaver until the indica, tors start to flash. 5. Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. 7. 2 Setting and starting a programme The Auto Off function To decrease the energy consumption, this function automatically deactivates the appliance a few minutes after: • You have not closed the door. • You have not pressed Start to start the programme. • The programme is completed. Starting a programme without delay start 1. Press the on/off button to activate the appliance. The indicator and the duration of the last set programme come on. • If you want to start the last set programme, press Start • If you want to set the MyFavourite programme, press MyFavourite. The indicators that are related to the MyFavourite programme and options come on. [. . . ] Refer to ‘HINTS AND TIPS’ for other possible causes. After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes, contact the Service. 10. 1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes • The released quantity of rinse aid is too much. [. . . ]