User manual AEG-ELECTROLUX PC7350

[. . . ] The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY Warning!Risk of suffocation, injury or permanent disability. [. . . ] • Place the end of this hose and the drain hose in a basin on the floor. • Select the Drain programme let it run until the end of the cycle. • Disconnect the appliance from the power supply by turning the programme selec. tor to “Stop” • Unplug the appliance. • Replace the inlet hose and drain hose. This way, the water remaining in the hoses will be drained away, avoiding any ice formation which would damage your appliance. Before turning your appliance on again, ensure that it is installed in an area where the temperature will not fall below freezing. HOW TO RUN A WASH CYCLE? USING FOR THE FIRST TIME • Ensure the electrical and water connections comply with the installation instructions. • Remove the polystyrene insert and all other items inside the drum. • Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water tank. electrolux 5 DAILY USE LOADING WASHING for Cottons, Synthetics, Lingerie, Wool/ Handwash, Eco, Easy iron : 900 rpm (PC7350), 800 rpm (EWB86215W), 700 rpm (EWB76215W), for Delicates, Mini programme, Curtains, Blanket : 700 rpm. At the end of the programme, if you have or “Night silence selected “Rinse hold” , you then need to select a “Spin” plus” or “Drain” programme to finish the cycle and empty the water. Night silence plus : this cycle eliminates all spin speed phases and ends with rinse hold. SELECTING THE SPIN SPEED Turn the spin speed selector on the desired position. The maximum spin speeds are : 1) Depending on model. 6 electrolux onds. The option is permanently activated, even if the appliance is switched off. “DELAY START” This option allows you to delay the start of a wash programme by 3, 6 or 9 hours by pushbutton. pressing the “Delay start” You can change or cancel the delayed start time at any time before you press the pushbutton by pressing “Start/Pause” the “Delay start” pushbutton again (when all indicators are off, the wash programme will start immediately). If you have already pressed the “Start/ pushbutton and you want to Pause” change or cancel the delayed start, proceed as follows : • To cancel the delay start and start the cycle immediately, press “Start/Pause” and then “Delay start” . Pause” • To change the timer delay period, you must go through the “Stop” position and reprogramme your cycle. The lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the pushbutton. After closing “Start/Pause” the lid again, press the “Start/Pause” pushbutton. START OF THE PROGRAMME pushbutton to Press the “Start/Pause” start the cycle. [. . . ] Curtains (cold - 40°) : For washing curtains. Blanket (30° - 40°) : For washing duvets or quilted fabrics. Load 2, 5 kg Possible options Rinse hold, Night silence plus, Prewash, Daily, Super quick, Rinse plus, Delay start Rinse hold, Night silence plus, Delay start Rinse hold, Night silence plus, Delay start Rinse hold, Night silence plus, Delay start 2, 5 kg 1, 0 kg 1, 0 kg 6, 0 kg Delay start 6, 0 kg Rinse hold, Night silence plus, Rinse plus, Delay start 6, 0 kg 6, 0 kg Delay start 6, 0 kg Rinse hold, Night silence plus, Prewash, Rinse plus, Delay start Rinse hold, Prewash, Rinse plus, Delay start Rinse hold, Night silence plus, Rinse plus, Delay start Delay start 1, 0 kg 2, 5 kg 2, 5 kg 1) Depending on model. 2) The “Cottons Eco 60 °C” and “Cottons Eco 40 °C” are respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton programme”. [. . . ]