User manual AEG-ELECTROLUX PEN ETN1041H

[. . . ] They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. ⷠChildren must get supervision to make sure that they do not play with the appliance. ⷠKeep all packaging away from children. There is the risk of suffocation or injury. [. . . ] It comes on when it is necessary to fill the rinse aid dispenser. It comes on when it is necessary to fill the salt container. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. After ten minutes from the end of the washing programme, the Auto Off function automatically deactivates the appliance. This helps to decrease energy consumption. Delay start button Press this button again and again to delay the start of the washing programme from 1 to 24 hours. Function buttons With these buttons you can: · Setting mode The appliance must be in setting mode for these operations: · Only one programme indicator comes on. ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. Be sure that the set level of the water softener agrees with the water hardness in your area. the rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1. Fill the rinse aid dispenser 3 with rinse aid. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme. Press the lid until it locks into position. Use of detergent To help the environment, do not use more than the correct quantity of detergent. obey the instructions on the detergent packaging. If the washing programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Some types of tablets can contain other agents. Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the products). [. . . ] Press the delay start button again and again until the display shows the time of the washing programme. Stops to flash and the washing programme starts automatically. Cancelling the washing programme If the washing programme has not started, you can change the selection. To change the selection while the washing programme operates, it is necessary to cancel the programme. [. . . ]