User manual AEG-ELECTROLUX PERFECTROSSODB450

[. . . ] The iron must not be left unattended while it is connected to the supply mains. Always stand the steam iron on its heel. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. The iron must be used and rested on a stable surface. [. . . ] Special tools are required to repair a damaged mains cord. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Repairs to this appliance may only be carried out by qualified service engineers. Considerable danger may result from improper repairs. If repairs become necessary, please contact the Customer Care Department or your authorised dealer. However, if the temperature selector (Figure 1/N) is turned back, please note that it takes a while for the soleplate to cool down. Only when the power indicator light comes on again has the soleplate reached the cooler temperature. The water reservoir should only be filled when the plug has been removed from the socket. To do this, you can use the measuring beaker supplied (Figure 1/P). This appliance complies with the following EU Directives: ­ 73/23/EEC of 19. On good quality garments they indicate the correct ironing temperatures. You can trigger the additional steam jet both when steam ironing and when dry ironing. 0 Set the temperature selector (Figure 1/N) to the "MAX" position and wait until the correct temperature has been reached, i. , until the power indicator (Figure 1/J) goes out. 0 Raise the steam iron a little away from the material and press the steam jet button (Figure 1/G). Always wait another 5 seconds before pressing the steam jet button again. The steam iron has an automatic decalcification feature, which significant slows down the deposit of limescale in the steam chamber. Neither vinegar nor proprietary brands of descaler must be filled into the water reservoir!Fill the water reservoir (Figure 1/O) with clear water to the "MAX" mark. Wait until the power indicator (Figure 1/J) goes out. Your steam iron is now ready for use again. of water and vinegar or with a nonabrasive cleaning agent. [. . . ] Therefore also clean the inside of the water reservoir. Fill it with water and gently shake the steam iron. Packaging material The packaging materials are environmentally friendly and can be recycled. Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. [. . . ]