User manual AEG-ELECTROLUX PLKU1267DS

[. . . ] Household Beverage Cooler Record Serial/Model Numbers . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 2 First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Beverage Cooler Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 P/N 297017400 (Oct 2004) This Use and Care Manual provides specific operating instructions for your model. Use your beverage cooler only as instructed in this manual. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance. Record the model and serial numbers in the space provided below. [. . . ] · Attach the brass attachment on the end of the cleaning hose to the faucet shank assembly by turning the stainless steel collar counterclockwise. · If the coupler has a shutoff, make sure it is in the open position. · Place the keg coupler in the cleaning solution bucket and pump the cleaning solution through the beer line. · Clean the faucet parts and keg coupler thoroughly using the faucet cleaning brush. Also, use the faucet cleaning brush to clean around the shank and coupling. · Rinse all the parts with cool fresh water and reassemble the faucet. · Detach the cleaning solution bottle from the faucet shank by turning the threaded stainless steel collar clockwise. · Fill the bottle with fresh water and re-attach it to the faucet shank assembly. Pump the water through the beverage line (clear hose). Make sure the end of the line is in a bucket to collect rinse water. · Disconnect the cleaner and reinstall the faucet to the shank by turning the collar counterclockwise using a faucet wrench and tightening it slightly. · Reattach the red hose (air line) to the keg coupler and open both the canister valve and regulator shut-off valve. · Reattach the keg coupler to the keg. Refer to Coupler ­ Keg Installation procedures. · Remove the drip tray and cover from the door and clean thoroughly. Refer to Cleaning and Maintenance Guide. · Reinstall the drip tray and cover to the door. Refer to Drip Tray Assembly Installation procedures. NOTE: Read and follow the instructions that come with the cleaning kit before cleaning your beverage cooler. VACATION AND MOVING TIPS · If the unit will not be used for several months, unplug the power cord, clean and dry the interior thoroughly and leave the door open slightly, blocking it open if necessary, to prevent odor and mold growth. · When moving the unit, disconnect the power cord from the wall outlet. Thoroughly clean the interior and secure all loose items by taping them securely in place to prevent damage. In the moving vehicle, secure the unit in an upright position to prevent movement. [. . . ] · Applied pressure is set too low. CLOUDY BEER ­ When beer in glass appears hazy, not clear. · Unrefrigerated beer for long periods of time. · Unrefrigerated foods placed on top of cold keg. [. . . ]