User manual AEG-ELECTROLUX RA1302

[. . . ] Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. aeg. com Register your product for better service: www. aeg. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. aeg. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. ENGLISH 3 1. SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. [. . . ] It is possible to deactivate the function at any time during the countdown: 1. Press the Mode button until the Minute Minder indicator flashes. It is possible to change the time during the countdown by pressing the Temper- 2. 7 COOLMATIC function If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator. Press the Mode button until the corresponding icon appears. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1. Press the Mode button until the COOLMATIC indicator flashes. The function switches off by selecting a different fridge set temperature. 2. 8 Extra Humidity function If you need to increase the humidity in the refrigerator, we suggest activating the Extra Humidity function: To switch on the function: ENGLISH 7 1. Press the Mode button until the corresponding icon appears. Press the Mode button until the Extra Humidity indicator flashes. The Extra Humidity indicator goes off. The fridge temperature indicator shows the set temperature. Press the Mode button until the Holiday indicator flashes. This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odor. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve 5. 1 Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. ENGLISH 11 the performance of the appliance and save energy consumption. Take care of not to damage the cooling system. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Many proprietary kitchen surface cleaners contain chemicals that can attack/ damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating. [. . . ] The manufacturer declines any liability should these safety measures not be observed. 1 Green and Yellow: 3 Brown: 5 Blue: Earth Live Neutral 1 2 5 4 3 The wires in the mains lead are coloured in accordance with the following code: As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the or coloured green earth symbol and yellow. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. [. . . ]