User manual AEG-ELECTROLUX RM6390L

[. . . ] MANUAL ABSORPTION REFRIGERATOR for RECREATIONAL VEHICLES RM 6390 (L) RM 6391 (L) EN English Typ C40 / 110 T. B. 03/2003 These operating instructions should be kept in a safe place. If this device is passed on, please include these operating instructions with it. © Dometic GmbH - 2003 - Subject to change without notice - Printed in Germany 2 1. 0 2. 0 INTRODUCTION FOR YOUR SAFETY 2. 2 Coolant 2. 1 Warning and safety notices 4 4 4 5 4 TABLE OF CONTENTS 3. 0 4. 0 5. 0 WARRANTY AND CUSTOMER SERVICE 3. 1 Damage in transit 5 DESCRIPTION OF MODEL REFRIGERATOR GUIDE 5. 1 Cleaning 5. 2 Switching on the refrigerator 5. 3 Switching off the refrigerator 5. 4 Defrosting 5. 5 Storing food 5. 6 Making ice cubes 5. 7 Door locking 5. 8 Winter operation 5. 9 Interior light 5. 10 Changing the decor panel 5. 11 Positioning the storage racks 5. 12 Changing the doorhang 5. 13 Troubleshooting 5. 14 Maintenance 5. 15 Environmental hints 5. 16 Disposal 5. 17 Energy-saving tips 5. 18 Technical data 5. 19 Declaration of conformity15 5 6 8 9 9 9 9 10 10 11 11 12 13 13 14 14 14 15 5 5 6. 0 INSTALLATION GUIDE 6. 1 6. 2 6. 3 6. 4 6. 5 6. 6 6. 7 6. 8 6. 9 Installation Draught-free installation Ventilation and air extraction Installation of the ventilation system Securing the refrigerator Installation recess Fume extraction Gas installation Electrical installation 16 17 18 19 16 19 20 21 22 24 3 1. 0 INTRODUCTION You have made an excellent choice in selecting the Dometic Absorption Refrigerator. We are sure that you will be fully satisfied with your new appliance in all respects. [. . . ] Unscrew the door strip (3 screws). 4. Remove the decor plate and insert a new decor plate. 5. Screw the door strip back in position. 6. Tighten the hinge screw. Dimensions of the panels in mm: Model Height RM 6390/91 738+/-1 Width 498, 5+1 Thickness 3, 0 5. 11 Positioning the storage rack Dismantling: 2. 1. 1. Loosen the front and back securing brackets. The non-ozone-hazardous cyclopentan is used as a propellant in the manufacture of the PU foam insulation. 5. 16 Disposal In order to ensure that the recyclable packaging materials are re-used, these should be sent to the usual local collection system. The appliance should be transferred to a suitable waste disposal company that will ensure re-use of the recyclable components and proper disposal of the rest. For eco-friendly draining of the coolant from all absorber refrigeration units, a suitable disposal plant should be used 5. 17 Energy-saving tips At an average ambient temperature of approx. 25°C, it is sufficient to operate the refrigerator at the middle thermostat setting (for both gas and mains voltage). Where possible, always store goods that have previously been cooled. Do not position the refrigerator in direct sunlight. Constant circulation of air must be supplied to the refrigerator unit. Open the door only for a short time when removing goods from the refrigerator. Run the refrigerator for about 12 hours before filling it. 14 5. 18 Technical data Model Dimensions H x W x D (mm) depth incl. door 821x525x623 821x525x623 Groos capacity Usable Connection incl. freezer capacity of Mains / Battery compartment freezer compartment 105 lit. 125W / 120W 125W / 120W * Consumption electricity / gas in 24 hrs ca. 2, 5KWh / 270g ca. 2, 5KWh / 270g Netweight Ignition Ignition Piezo Reigniter Steppedcabinet RM 6390 RM 6391 28 kg 28 kg X X X X We reserve the right to make technical changes. *Average consumption measured at an average ambient temperature of 25°C in pursuance of ISO Standard. 5. 19 Declaration of confomity 15 6. 0 INSTALLATION GUIDE On installation of the appliance, the technical and administrative regulations of the country in which the vehicle will first be used must be adhered to. Otherwise the refrigerator must be installed as described in these instructions. In some OEM applications it may not be possible for these instructions to be followed exactly. In this case an authorised Dometic representative may issue supplementary instruction In Europe, for example, gas appliances, cable laying, installation of gas cylinders, as well as approval and checking for leaks must comply with DIN EN 1949 for liquid gas units in vehicles. 6. 1 Installation The appliance and its fume extraction shall be installed in such a way as to be accessible for servicing at all times and must be capable of easy removal and installation. The appliance may only be installed by authorised personnel. [. . . ] A plate showing the permanent, clearly legible notice must be displayed in full view at the point where the gas cylinder is installed. The gas connection (1) to the appliance must be installed securely and at zero potential using tube connectors and must be securely connected to the vehicle (a hose connection is not permissible). Inflamable material should not be in immediate proximity to the burner. 22 The gas connection to the appliance is effected by means of a suitable coupling tube fitting L8, DIN 2353-ST, complying with European Standard EN 1949 (e. g. Ermeto) The gas connection may only be carried out by a qualified personnel. [. . . ]