User manual AEG-ELECTROLUX S 75400 KG

[. . . ] S 75400 KG Refrigerator freezer combination Instruction book A/AE/7. (06. ) 200370791 PERFEKT IN FORM UND FUNKTION Dear customer, Before switching on your new appliance please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] The DESIRED temperature is indicated by flashing numbers. ACTUAL temperature means: The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers. Temperature display The temperature display can indicate several pieces of information. During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed. When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature). 19 Starting Up - Setting the Temperature 1. Plug the mains plug into the mains socket. The alarm light (M) flashes since the temperature is reached. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. Set the required temperature by pressing the (I) or (K) buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperature is adjusted by 1 °C. From a food safety point of view -18 °C should be considered sufficiently cold for storing food in the freezer. FROSTMATIC The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. The FROSTMATIC function is switched on by pressing the FROSTMATIC button (H). If the FROSTMATIC function is not ended manually, the appliance will switch off the FROSTMATIC function after about 52 hours. The FROSTMATIC function can be ended manually at any time by pressing the FROSTMATIC button again. The yellow light goes out. Alarm reset button In the event of an abnormal temperature rise inside the freezer (e. g. power cut) warning light (M) will start to flash and a buzzer will sound. Push the alarm reset button (L) to stop the buzzer sound, while the warning light will continue to flash. The buzzer will stop automatically when the temperature has returned to normal while the warning light (M) will continue to flash. If we press the alarm reset button (L) we stop the warning light and at the same time the indicator show for about 5 seconds the warmest temperature reached in the compartment. 20 Switching the Appliance off To switch off, hold down the (A) button. If the appliance is not going to be used for an extended period: 1. Remove the mains plug or switch off or turn out the circuit breaker or fuse. [. . . ] The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property. This guarantee is in addition to your statutory and other legal rights. [. . . ]