User manual AEG-ELECTROLUX S1544-4I

[. . . ] Do not use the cleaner with a damaged cable. If the cable damaged, it should be replaced at a service center. The Plug must be removed from the socket-outlet before cleaning or maintaining the appliance. All service and repairs must be carried out by authorised AEG-Electrolux service staff. Getting Started (see page 4) Check the dustbag is in place. [. . . ] Insert the hose until the catches click to engage. Attach the telescopic tube to the hose handle and floor nozzle by pushing and twisting together. The cleaner is fitted with cable rewind, ensure cable is not twisted before use. Note: Please hold the plug to prevent it striking you or the machine). Press the On/Off button to activate the cleaner. By moving the variable power control, the suction power can be adjusted. Suction can also be regulated on the hose handle by opening/closing the aperture. Accessories (see page 4) Dust bags Telescopic tube Metal tubes (x2) (smart450) Swivel hose and handle with manual suction control Combination carpet/hard floor nozzle Narrow crevice nozzle Combination upholstery nozzle/brush Safety instructions The cleaner is for domestic use only and has been designed to ensure maximum safety and performance. Please follow these simple precautions: The cleaner is double-insulated so it must not be earthed. The cleaner is only to be used by adults. To clean Motor Protection filter The Motor Protection filter should be cleaned when dirty. Pull dustbag upward and remove the motor protection filter. Rinse the filter under tap water and dry it completely. Put the filter back into the cleaner and close the cover. To change Micro filter The Micro filter should be changed with every fifth dustbag. Open the filter grill and remove the exhaust filter. Rinse the filter under tap water and dry it completely. Put the filter back into the cleaner and close the filter grill. 10 Troubleshooting Power: If the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. Blockages/dirty filters: The cleaner may switch itself off in the event of a severe blockage or excessively dirty filter(s). [. . . ] Put the filter back into the cleaner and close the filter grill. 10 Troubleshooting Power: If the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. Blockages/dirty filters: The cleaner may switch itself off in the event of a severe blockage or excessively dirty filter(s). In such cases, disconnect from mains and allow to cool for 20-30 minutes. Clear blockage and/or replace filter(s) and restart. [. . . ]