User manual AEG-ELECTROLUX S2042-5ECH

[. . . ] · Disable discarded appliances by removing the plug and cutting through the connection cable. Render the catch unusable so that children cannot become trapped inside. · Make sure that the refrigerant circuit of an appliance that is no longer needed is not damaged before it is collected or handed in at a municipal collection point. · Details of the refrigerant used can be found on the type plate. [. . . ] Setting "1" = lowest cooling setting, highest temperature Setting "7" = highest cooling setting, lowest temperature When storing pre-frozen food in the freezer compartment, we recommend a temperature setting of between 4 and 7, in order to achieve temperatures of -18°C or lower inside the compartment. · Slacken screws right and left. · Adjust door angle with set screws and height with set screw . · Fasten appliance door with screws . Adjusting appliance door 21 Freezing Fresh food should be frozen to the core as rapidly as possible. Frozen food can also be given a cold boost. This is provided by the "Superfrost" facility and ensures that the nutritional value, appearance and flavour of the food remain intact. The maximum amount of food wich can be frozen in 24 hours is shown on the type plate ("Freezing capacity . . . This amount varies according to the model and climate rating. Equipment You can re-arrange the storage shelves as required. Slide the shelf forwards, lift and remove. When inserting a shelf, the guard bar at the back must be facing upwards, otherwise food may freeze to the rear wall. · Set the temperature control to a medium to cold setting. · Place the fresh food in the freezer. · Now switch back the temperature control to the required setting. Ensure that the water can flow without hindrance through the hole above the vegetable bins. After a long period of operation, a layer of frost or ice can build up inside the freezer compartment. You should therefore defrost the freezer compartment regularly. Malfunctions GB You may be able to rectify the following faults by checking the possible causes yourself: Appliance does not function: ­ Is the appliance switched on?­ Is the plug correctly fitted in the mains socket?Loud running noise: ­ Is the appliance set up firmly on the floor?­ Does the appliance cause nearby items of furniture or objects to vibrate?Please note that noises caused by the refrigerant circuit cannot be avoided. The temperature is not low enough: ­ Is the temperature setting correct (see "Setting the temperature")?­ Have excessive amounts of fresh food been placed in the appliance?­ Is the ventilation system working properly?­ Is the appliance set up too close to a heat source? [. . . ] · Fasten the attachment strut : With at least 6 screws (4x14) if the doors are made of wood board. With 4 screws round the edge in the case of panel doors. · Lift the fitting aids out to the top, turn round and insert into the adjacent openings. · Suspend the unit door on the door of the appliance/ adjusting pins . [. . . ]